我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Sapphire Tech

Sapphire Tech NITRO+ Radeon RX 9070 XT 11348-01-20G graphics card

SKU CH-QKHS-Y7F51 MPN 11348-01-20G

Delivers 16 GB GDDR6 on a 256-bit bus with boost clocks up to 3060 MHz, PCIe 5.0 x16, and triple-fan cooling in a 3.2-slot ATX design

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 9000 Series
  • GPURadeon RX 9070 XT
  • ArchitectureRDNA 4
  • Game ClockUp to 2520 MHz

Option NITRO+

被劃上刪除線的選項確實存在,但本站並無供貨。

Edition RX 9070 XT

  • RX 9070 XT
  • RX 9070
  • RX 9070 GRE

被劃上刪除線的選項確實存在,但本站並無供貨。

  • Boost clock up to 3060 MHz for high frame rates
  • 16 GB GDDR6 on a 256-bit bus for large textures
  • PCI Express 5.0 x16 interface for maximum bandwidth
  • Triple-fan cooler handles 304 W thermal design power
  • Two HDMI and two DisplayPort 2.1a outputs drive four displays

Sapphire NITRO+ RX 9070 XT 16GB

This graphics card uses the AMD Radeon RX 9070 XT GPU built on RDNA 4 architecture. It delivers 16GB of GDDR6 memory across a 256-Bit interface running at 20 Gbps. The board targets enthusiasts who want high-frame-rate 4K gaming and content creation workloads. A triple-fan cooler handles the 304W thermal design power.

Check PSU PCIe 5.0 power connector

Your power supply must provide at least 850W and include a native 12V-2x6 connector for the single PCIe 5.0 power input. Verify the case can clear 331 mm in length and 3.2 slot width for the ATX form factor. Ensure the motherboard has a PCI Express 5.0 x16 slot to match the card interface. Confirm display cables suit two HDMI and two DisplayPort 2.1a outputs.

Suits 4K gamers and creators needing 16GB VRAM

The 4096 stream processors and boost clock up to 3060 MHz suit high-refresh 4K gaming and GPU-accelerated creative apps. Users with smaller cases, PSUs below 850W, or older PCIe 3.0 platforms should consider a shorter, lower-power model. Multi-monitor setups benefit from the four-display support at 7680 x 4320 max resolution.

商品特色

  • Boost clock up to 3060 MHz for high frame rates
  • 16 GB GDDR6 on a 256-bit bus for large textures
  • PCI Express 5.0 x16 interface for maximum bandwidth
  • Triple-fan cooler handles 304 W thermal design power
  • Two HDMI and two DisplayPort 2.1a outputs drive four displays

商品規格

BrandSAPPHIRE
SeriesNITRO+
Model11348-01-20G
Part Number11348-01-20G
InterfacePCI Express 5.0 x16
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 9000 Series
GPURadeon RX 9070 XT
ArchitectureRDNA 4
Game ClockUp to 2520 MHz
Boost ClockUp to 3060 MHz
Stream Processors4096
Effective Memory Clock20000 MHz (20 Gbps)
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI
DisplayPort2 x DisplayPort 2.1a
ColorGray
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power304W
Recommended PSU Wattage850W
Power Connector1 x 12V-2x6-pin
HDCP ReadyYes
Form FactorATX
Max GPU Length331 mm
Card Dimensions (L x H)331 x 129 x 66 mm
Slot Width3.2 Slots
出貨重量2.63 kg
包裝尺寸432 × 241 × 89 mm

其他版本

同系列還有 1 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What is included in the box and what must I buy separately?

The card ships with the triple-fan cooler installed and a 12V-2x6 power adapter. You must supply an 850W PSU, a PCIe 5.0 x16 slot and your own display cables.

How do I decide between the available versions or capacities?

This model is a single SKU with 16GB GDDR6 on a 256-bit bus and a 3060 MHz boost clock; there are no alternate memory sizes or factory-overclocked variants to choose from.

What does the 3060 MHz boost clock mean once the card is in my system?

It is the peak frequency the GPU can reach under load, limited by the 304W power budget, thermals and the 850W PSU you provide.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。