暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular power supply with flat etched cables and a 135mm fan

Thermaltake

Thermaltake PS-TPP-1000FNFAPU-1 1000 W power supply

SKU CH-213Z-E9HBE MPN PS-TPP-1000FNFAPU-1

ATX 3.1 compliant 1000 W unit with native 12V-2x6 GPU power, 80 PLUS Platinum efficiency at 115 V, full modular flat cables, Japanese 105 °C capacitors and a 135 mm hydraulic bearing fan

  • ColorBlack
  • Maximum Power1000 W
  • Fans135mm FDB fan
  • PFCActive
  • ModularFull Modular
  • EfficiencyMeet 80 PLUS Platinum at 115Vac input.
  • 1000 W continuous output at 40 °C ambient
  • 80 PLUS Platinum efficiency at 115 V input
  • Native PCIe 5.1 12V-2x6 cable for 600 W GPU power
  • Fully modular flat etched cables simplify routing
  • 135 mm hydraulic bearing fan with 100,000 hrs MTBF

1000 W ATX 3.1 power supply

This fully modular unit delivers 1000 W continuous output at 40 °C and meets 80 PLUS Platinum efficiency at 115 V input. It is built for builders who need a compact, high-efficiency supply that supports the latest ATX 3.1 standard and native PCIe 5.1 12V-2x6 connections for modern graphics cards. The 135 mm hydraulic bearing fan and 100 % Japanese 105 °C capacitors provide quiet operation and long-term durability under heavy loads.

Installation and common issues

The flat etched cable set is fully modular, so you connect only the leads your build requires, improving airflow and cable routing in tight cases. Dual-colour H++ connectors show a matcha indicator that disappears when the plug is fully seated, reducing the risk of loose power connections. Ensure the 12V-2x6 cable is routed without sharp bends and that the fan intake remains unobstructed; the most frequent issue is restricted airflow in smaller chassis.

Pre-order checklist

Verify that your case can accommodate a 140 mm deep power supply and that the 135 mm fan has clearance for intake air. Confirm your motherboard and graphics card require the native 12V-2x6 connector; older GPUs using traditional 8-pin PCIe plugs will need the appropriate modular cables from the set. Check that your mains supply falls within the 100-240 V, 47-63 Hz range and that the 15 A maximum input current is supported by your circuit.

特長

  • 1000 W continuous output at 40 °C ambient
  • 80 PLUS Platinum efficiency at 115 V input
  • Native PCIe 5.1 12V-2x6 cable for 600 W GPU power
  • Fully modular flat etched cables simplify routing
  • 135 mm hydraulic bearing fan with 100,000 hrs MTBF

仕様

BrandThermaltake
ModelPS-TPP-1000FNFAPU-1
ColorBlack
Maximum Power1000 W
Fans135mm FDB fan
PFCActive
ModularFull Modular
EfficiencyMeet 80 PLUS Platinum at 115Vac input.
Input Voltage100-240V~
Input Frequency Range47 - 63 Hz
Input Current15.0A Max.
MTBF100,000 hrs minimum
Power Good Signal100-150 msec
Dimensions5.9 in x 5.5 in x 3.4 in
Weight4lbs
配送重量3.45 kg
梱包サイズ305 × 216 × 122 mm

この商品に関する質問

How do I confirm the power supply is running correctly once installed?

The unit sends a power-good signal within 100 to 150 milliseconds after switch-on; a stable system boot and no protection triggers indicate normal operation.

Which cables and connectors come in the box and what must I source myself?

The package includes a full modular set with flat etched cables and a native 12V-2x6 GPU connector; only the AC power cord is typically supplied separately.

Which capacity should I choose for a build that needs a single 12V rail and ATX 3.1 support?

The 1000 W model provides a strong single +12V rail, ATX 3.1 compliance and up to 600 W through the 12V-2x6 connector for modern GPUs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。