저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Thermaltake

Thermaltake PS-TPP-1000FNFAPU-1 1000 W power supply

SKU CH-213Z-E9HBE MPN PS-TPP-1000FNFAPU-1

ATX 3.1 compliant 1000 W unit with native 12V-2x6 GPU power, 80 PLUS Platinum efficiency at 115 V, full modular flat cables, Japanese 105 °C capacitors and a 135 mm hydraulic bearing fan

  • ColorBlack
  • Maximum Power1000 W
  • Fans135mm FDB fan
  • PFCActive
  • ModularFull Modular
  • EfficiencyMeet 80 PLUS Platinum at 115Vac input.
  • 1000 W continuous output at 40 °C ambient
  • 80 PLUS Platinum efficiency at 115 V input
  • Native PCIe 5.1 12V-2x6 cable for 600 W GPU power
  • Fully modular flat etched cables simplify routing
  • 135 mm hydraulic bearing fan with 100,000 hrs MTBF

1000 W ATX 3.1 power supply

This fully modular unit delivers 1000 W continuous output at 40 °C and meets 80 PLUS Platinum efficiency at 115 V input. It is built for builders who need a compact, high-efficiency supply that supports the latest ATX 3.1 standard and native PCIe 5.1 12V-2x6 connections for modern graphics cards. The 135 mm hydraulic bearing fan and 100 % Japanese 105 °C capacitors provide quiet operation and long-term durability under heavy loads.

Installation and common issues

The flat etched cable set is fully modular, so you connect only the leads your build requires, improving airflow and cable routing in tight cases. Dual-colour H++ connectors show a matcha indicator that disappears when the plug is fully seated, reducing the risk of loose power connections. Ensure the 12V-2x6 cable is routed without sharp bends and that the fan intake remains unobstructed; the most frequent issue is restricted airflow in smaller chassis.

Pre-order checklist

Verify that your case can accommodate a 140 mm deep power supply and that the 135 mm fan has clearance for intake air. Confirm your motherboard and graphics card require the native 12V-2x6 connector; older GPUs using traditional 8-pin PCIe plugs will need the appropriate modular cables from the set. Check that your mains supply falls within the 100-240 V, 47-63 Hz range and that the 15 A maximum input current is supported by your circuit.

주요 특징

  • 1000 W continuous output at 40 °C ambient
  • 80 PLUS Platinum efficiency at 115 V input
  • Native PCIe 5.1 12V-2x6 cable for 600 W GPU power
  • Fully modular flat etched cables simplify routing
  • 135 mm hydraulic bearing fan with 100,000 hrs MTBF

사양

BrandThermaltake
ModelPS-TPP-1000FNFAPU-1
ColorBlack
Maximum Power1000 W
Fans135mm FDB fan
PFCActive
ModularFull Modular
EfficiencyMeet 80 PLUS Platinum at 115Vac input.
Input Voltage100-240V~
Input Frequency Range47 - 63 Hz
Input Current15.0A Max.
MTBF100,000 hrs minimum
Power Good Signal100-150 msec
Dimensions5.9 in x 5.5 in x 3.4 in
Weight4lbs
배송 무게3.45 kg
포장 크기305 × 216 × 122 mm

이 상품에 대한 질문

How do I confirm the power supply is running correctly once installed?

The unit sends a power-good signal within 100 to 150 milliseconds after switch-on; a stable system boot and no protection triggers indicate normal operation.

Which cables and connectors come in the box and what must I source myself?

The package includes a full modular set with flat etched cables and a native 12V-2x6 GPU connector; only the AC power cord is typically supplied separately.

Which capacity should I choose for a build that needs a single 12V rail and ATX 3.1 support?

The 1000 W model provides a strong single +12V rail, ATX 3.1 compliance and up to 600 W through the 12V-2x6 connector for modern GPUs.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.