저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Coiled white PVC tube 10mm ID 13mm OD 1m UV reactive

Alphacool

Alphacool AlphaTube HF Tubing 10/13mm 1m UV White PVC

SKU CH-5VFY-DQ36Q

UV-reactive white PVC tubing with 10 mm inner and 13 mm outer diameter, rated for 80 °C and 2 bar working pressure

  • TypeTubing

Length 1m

Color UV White

  • UV White glows under UV light for striking aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard 3/8" ID and 1/2" OD fittings
  • Flexible PVC with 65-70 A-Shore hardness bends easily without kinking
  • Rated for -10 °C to 80 °C working temperature range
  • 1 metre length suits compact or custom loop layouts

Tubing for Custom Water-Cooling Loops

This PVC tubing connects pumps, radiators, blocks and reservoirs in a custom liquid-cooling loop. The 10 mm inner diameter and 13 mm outer diameter fit standard G1/4 fittings. A 65–70 A-Shore hardness keeps the tube flexible for routing yet stiff enough to resist kinking on tight bends. One metre length suits most single-loop builds.

Replaces Worn or Mismatched Tubing

Swap out aged, discoloured or incorrectly sized hose when rebuilding or expanding a loop. The upgrade is worth it when the old tubing has lost plasticiser, shows clouding or cannot meet the 2 bar working pressure and 8 bar burst rating. UV White colour also changes the loop aesthetic without new components.

Handles Standard Loop Pressures and Temperatures

Rated for continuous use between –10 °C and 80 °C at up to 2 bar working pressure with an 8 bar burst margin. Comfortably feeds typical single-pump configurations and common radiator counts. Runs out of headroom in multi-pump serial setups or extreme sub-ambient chillers that exceed the temperature or pressure envelope.

주요 특징

  • UV White glows under UV light for striking aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard 3/8" ID and 1/2" OD fittings
  • Flexible PVC with 65-70 A-Shore hardness bends easily without kinking
  • Rated for -10 °C to 80 °C working temperature range
  • 1 metre length suits compact or custom loop layouts

사양

TypeTubing

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What fitting sizes match the 10 mm inner and 13 mm outer diameter of this tubing?

Use compression fittings rated for 10 mm ID and 13 mm OD, or 3/8 inch ID and 1/2 inch OD barbs with matching clamps.

How do I install the tubing without kinking it during tight bends?

Warm the PVC gently with warm water, push it fully onto the fitting until it seats against the collar, and avoid bending sharper than the tubing's natural curve.

When should I plan to replace this tubing in a loop running near the 80 °C limit?

Inspect every six to twelve months; replace if the material yellows, stiffens beyond the 65-70 A-Shore range, or shows micro-cracks near fittings.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.