저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board mezzanine card with gold edge connectors and metal bracket

DELL

DELL 3N9XX VRTX PCIe Pass-Through Mezzanine Adapter network card

SKU CH-MVQA-328SP

Pass-through mezzanine card connects Dell PowerEdge M520, M620 and M630 blades directly to VRTX chassis I/O modules at 1Gbps or 10Gbps

  • Speed1Gbps or 10Gbps pass-through
  • ConnectorsPass-through interface (connects internally to VRTX chassis
  • InterfaceMezzanine PCIe (internal blade slot)
  • FeaturesDesigned for Dell PowerEdge M520 (and other VRTX blades) Ena
  • Package Contents1x Dell 3N9XX Pass-Through Mezzanine Card
  • ClassServer Network Adapter
  • Direct PCIe pass-through to external switches
  • Supports 1Gbps or 10Gbps pass-through speeds
  • Compatible with PowerEdge M520, M620, M630 blades
  • Low-latency design with no internal switching logic
  • Low-profile mezzanine card for VRTX chassis

Dell VRTX Pass-Through Mezzanine Adapter

The Dell 3N9XX is a pass-through mezzanine network adapter built for Dell PowerEdge M520, M620 and M630 blade servers installed in a VRTX chassis. It provides a direct PCIe link from the blade to the chassis I/O module without any internal switching or logic. This design suits administrators who need deterministic low-latency paths to external physical switches.

Compatibility check before ordering

Verify that the target blade is a supported M520, M620 or M630 and that it resides inside a Dell PowerEdge VRTX shared infrastructure chassis. Confirm an available internal mezzanine slot on the blade and ensure the chassis I/O module provides the external switch connectivity your topology requires. The adapter will not function in non-VRTX enclosures or unsupported blade models.

What the bundle changes

The package contains only the 3N9XX pass-through mezzanine card itself. No cables, transceivers, drivers or management utilities are included, so you must source compatible SFP+ or other optics and any required firmware from the switch vendor or Dell support channels. Installation is a simple blade-slot insertion, but external cabling and switch configuration remain separate tasks.

주요 특징

  • Direct PCIe pass-through to external switches
  • Supports 1Gbps or 10Gbps pass-through speeds
  • Compatible with PowerEdge M520, M620, M630 blades
  • Low-latency design with no internal switching logic
  • Low-profile mezzanine card for VRTX chassis

사양

BrandDell
Model3N9XX
Part Number3N9XX+AA
Speed1Gbps or 10Gbps pass-through
ConnectorsPass-through interface (connects internally to VRTX chassis I/O module)
InterfaceMezzanine PCIe (internal blade slot)
FeaturesDesigned for Dell PowerEdge M520 (and other VRTX blades)
Enables direct PCIe pass-through to VRTX I/O modules
No switching or logic – direct external switch integration
Low power, low latency
Package Contents1x Dell 3N9XX Pass-Through Mezzanine Card
ClassServer Network Adapter

이 상품에 대한 질문

Does the Dell 3N9XX mezzanine card ship with any cables or transceivers, or must those be purchased separately?

The package contains only the pass-through mezzanine card; external I/O modules and any required cabling are supplied with the VRTX chassis, not with this adapter.

Which blade models are supported by the 3N9XX pass-through adapter?

The adapter is designed for PowerEdge M520, M620 and M630 blades installed in a VRTX chassis.

What does the 1Gbps or 10Gbps pass-through rating mean for actual throughput on the blade?

The card provides a direct PCIe lane to the chassis I/O module, so line-rate throughput matches whatever external switch module is installed in the VRTX.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.