我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board mezzanine card with gold edge connectors and metal bracket

DELL

DELL 3N9XX VRTX PCIe Pass-Through Mezzanine Adapter network card

SKU CH-MVQA-328SP

Pass-through mezzanine card connects Dell PowerEdge M520, M620 and M630 blades directly to VRTX chassis I/O modules at 1Gbps or 10Gbps

  • Speed1Gbps or 10Gbps pass-through
  • ConnectorsPass-through interface (connects internally to VRTX chassis
  • InterfaceMezzanine PCIe (internal blade slot)
  • FeaturesDesigned for Dell PowerEdge M520 (and other VRTX blades) Ena
  • Package Contents1x Dell 3N9XX Pass-Through Mezzanine Card
  • ClassServer Network Adapter
  • Direct PCIe pass-through to external switches
  • Supports 1Gbps or 10Gbps pass-through speeds
  • Compatible with PowerEdge M520, M620, M630 blades
  • Low-latency design with no internal switching logic
  • Low-profile mezzanine card for VRTX chassis

Dell VRTX Pass-Through Mezzanine Adapter

The Dell 3N9XX is a pass-through mezzanine network adapter built for Dell PowerEdge M520, M620 and M630 blade servers installed in a VRTX chassis. It provides a direct PCIe link from the blade to the chassis I/O module without any internal switching or logic. This design suits administrators who need deterministic low-latency paths to external physical switches.

Compatibility check before ordering

Verify that the target blade is a supported M520, M620 or M630 and that it resides inside a Dell PowerEdge VRTX shared infrastructure chassis. Confirm an available internal mezzanine slot on the blade and ensure the chassis I/O module provides the external switch connectivity your topology requires. The adapter will not function in non-VRTX enclosures or unsupported blade models.

What the bundle changes

The package contains only the 3N9XX pass-through mezzanine card itself. No cables, transceivers, drivers or management utilities are included, so you must source compatible SFP+ or other optics and any required firmware from the switch vendor or Dell support channels. Installation is a simple blade-slot insertion, but external cabling and switch configuration remain separate tasks.

商品特色

  • Direct PCIe pass-through to external switches
  • Supports 1Gbps or 10Gbps pass-through speeds
  • Compatible with PowerEdge M520, M620, M630 blades
  • Low-latency design with no internal switching logic
  • Low-profile mezzanine card for VRTX chassis

商品規格

BrandDell
Model3N9XX
Part Number3N9XX+AA
Speed1Gbps or 10Gbps pass-through
ConnectorsPass-through interface (connects internally to VRTX chassis I/O module)
InterfaceMezzanine PCIe (internal blade slot)
FeaturesDesigned for Dell PowerEdge M520 (and other VRTX blades)
Enables direct PCIe pass-through to VRTX I/O modules
No switching or logic – direct external switch integration
Low power, low latency
Package Contents1x Dell 3N9XX Pass-Through Mezzanine Card
ClassServer Network Adapter

商品問答

Does the Dell 3N9XX mezzanine card ship with any cables or transceivers, or must those be purchased separately?

The package contains only the pass-through mezzanine card; external I/O modules and any required cabling are supplied with the VRTX chassis, not with this adapter.

Which blade models are supported by the 3N9XX pass-through adapter?

The adapter is designed for PowerEdge M520, M620 and M630 blades installed in a VRTX chassis.

What does the 1Gbps or 10Gbps pass-through rating mean for actual throughput on the blade?

The card provides a direct PCIe lane to the chassis I/O module, so line-rate throughput matches whatever external switch module is installed in the VRTX.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。