SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501657BTC
재고 있음
GAMDIAS Technology
GAMDIAS Technology ATHENA P3 PC Case 238mm Wide 430mm GPU 4x 140mm Fans
E-ATX mid-tower with four 140 mm PWM fans, 430 mm GPU clearance and a 238 mm wide mesh front for high-airflow builds
- TypeE-ATX Mid Tower Chassis
- ColorBlack
- Motherboard CompatibilityExtended ATX
- Side Panelwith Side Window
- Dust FiltersTop and Bottom
- Internal 3.5" Drive Bays2
- Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
- Bar-patterned mesh front with dual accents draws cool air through a gap-bridging bracket
- Supports graphics cards up to 430 mm long and CPU coolers up to 180 mm tall
- Fits Mini-ITX, Micro-ATX, ATX and smaller E-ATX boards plus 360 mm or 420 mm radiators
- Includes 8-port PWM ARGB fan hub, Velcro straps and perforated PSU chamber for tidy cable routing
Compact E-ATX Chassis
The GAMDIAS Technology ATHENA P3 is a 238 mm wide mid-tower that accepts Extended ATX motherboards up to the smaller E-ATX form factor. Four pre-installed 140 mm PWM fans and a dedicated gap bridging bracket deliver high-volume airflow through the bar-patterned mesh front panel. A perforated PSU chamber and integrated cable routing support cleaner builds with longer power supplies.
Suits High-Airflow Builds.
Enthusiasts who want strong out-of-the-box cooling for long graphics cards and tall CPU coolers will appreciate the 430 mm GPU clearance and 180 mm cooler height limit. The included 8-port PWM ARGB hub simplifies fan management for custom loops or air towers. Builders needing front-mounted 420 mm radiators or multiple 3.5 inch drive stacks should consider wider alternatives.
430 mm GPU Clearance Decides Fit
The single specification that determines compatibility is the maximum graphics card length of 430 mm. Measure your card including any backplate or power connector overhang before ordering. If the card exceeds this figure the side panel will not close and airflow will be compromised.
주요 특징
- Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
- Bar-patterned mesh front with dual accents draws cool air through a gap-bridging bracket
- Supports graphics cards up to 430 mm long and CPU coolers up to 180 mm tall
- Fits Mini-ITX, Micro-ATX, ATX and smaller E-ATX boards plus 360 mm or 420 mm radiators
- Includes 8-port PWM ARGB fan hub, Velcro straps and perforated PSU chamber for tidy cable routing
사양
| Brand | Gamdias |
|---|---|
| Series | ATHENA |
| Model | P3 |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Motherboard Compatibility | Extended ATX |
| Side Panel | with Side Window |
| Dust Filters | Top and Bottom |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| 140mm Fans | 4 |
| Max GPU Length | 430 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 220 mm |
| Dimensions | 500 x 238 x 500 mm |
| Weight | 20 lbs |
이 상품에 대한 질문
Will a 238 mm wide case fit a 430 mm long graphics card and a 180 mm tall CPU cooler?
The chassis accepts graphics cards up to 430 mm long and CPU coolers up to 180 mm tall, so both components fit within the stated limits.
How do I connect the four included 140 mm PWM fans so they run at the correct speed?
Plug each fan into the supplied 8-port PWM fan hub, then connect the hub’s single PWM header to the motherboard CPU_FAN or SYS_FAN header for unified speed control.
When should I clean the top and bottom dust filters on this case?
Remove and rinse the magnetic top and bottom filters every few months, or sooner if airflow feels restricted, to keep the four 140 mm fans moving air efficiently.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
