저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

JONSBO

JONSBO C6 Black Micro ATX Mesh PC Case

SKU CH-634A-SZC7P

Compact steel Micro-ATX chassis with mesh panels, tool-free panels, one 3.5-inch and two 2.5-inch bays, GPU clearance to 255 mm, CPU cooler limit 75 mm, PSU limit 185 mm.

  • TypeMicro ATX / Mini-ITX
  • ColorBlack
  • Case MaterialSteel
  • Motherboard CompatibilityMicro ATX / Mini ITX
  • Dust FiltersBottom
  • Internal 3.5" Drive Bays1
  • Compact Micro ATX chassis fits small workspaces
  • All-mesh panels on front, top and bottom maximise airflow
  • Tool-free top and side panels simplify builds and upgrades
  • Supports graphics cards up to 255 mm for capable gaming
  • 75 mm CPU cooler clearance accommodates low-profile coolers

Compact Micro ATX Mesh Chassis

The JONSBO C6 Black is a steel Micro ATX and Mini-ITX case with mesh on all sides for open airflow. It suits builders who want a small desktop footprint with room for a modest graphics card and a choice of 3.5-inch or 2.5-inch storage.

Check Clearances Before Buying

Verify your CPU cooler height stays within 75 mm and your power supply length does not exceed 185 mm. Graphics cards must fit the 220-255 mm maximum length and the motherboard must be Micro ATX or Mini-ITX. No bottom dust filter is mentioned beyond the single bottom filter.

Sustained Airflow Behaviour

Three fan positions across front, top and bottom accept 120 mm or 140 mm fans to move air through the full mesh panels. This layout helps steady temperatures during long sessions rather than only short bursts. The tool-free top and side panels allow quick access if fan cleaning becomes necessary.

주요 특징

  • Compact Micro ATX chassis fits small workspaces
  • All-mesh panels on front, top and bottom maximise airflow
  • Tool-free top and side panels simplify builds and upgrades
  • Supports graphics cards up to 255 mm for capable gaming
  • 75 mm CPU cooler clearance accommodates low-profile coolers

사양

BrandJonsbo
TypeMicro ATX / Mini-ITX
ColorBlack
Case MaterialSteel
Motherboard CompatibilityMicro ATX / Mini ITX
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Fan OptionsBottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm
Max GPU Length220-255mm
Max CPU Cooler Height75 mm
Max PSU Length185 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the JONSBO C6 include any fans or do I need to buy them separately?

No fans are included with the case. It provides mounting points for one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top, so you will need to purchase fans separately.

Which drive configuration should I choose between the single 3.5 inch bay and the two 2.5 inch bays?

The case fits either one 3.5 inch hard drive or up to two 2.5 inch solid-state drives in the same mounting area. Choose the 3.5 inch bay for higher capacity mechanical storage, or the two 2.5 inch bays if you prefer faster SSDs and can work within their capacity limits.

What does the 220 to 255 mm maximum graphics card length mean for my build?

Your graphics card must not exceed 255 mm in length. Measure the card you plan to use; if it is longer it will not fit, and if it is close to the limit you should verify cable clearance at the front of the case.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.