저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

KingSpec

KingSpec ACJC2M128S18 128GB 1.8-inch SATA internal SSD

SKU CH-P2XC-BT708 MPN ACJC2M128S18

A 1.8-inch SATA solid-state drive holding 128GB with MLC NAND, delivering read speeds up to 495MB/s and write speeds up to 191MB/s via a JMicron JMF608 controller

  • Read speeds up to 495 MB/s for quick boot times
  • Write speeds up to 191 MB/s for responsive file saves
  • 128 GB capacity stores OS and essential apps
  • 8-inch SATA form factor fits legacy laptops and industrial gear
  • 1,000,000-hour MTBF and 0 °C to 70 °C rating for long service life

KingSpec 128 GB 1.8-inch SATA SSD

This KingSpec ACJC2M128S18 is a 128 GB internal solid-state drive built in the 1.8-inch form factor with a SATA III interface. It uses a JMicron JMF608 controller and MLC NAND flash to deliver sequential reads up to 495 MB/s and writes up to 191 MB/s. The drive is suited to any Windows or Mac system that provides a standard SATA connection.

Suits older laptops and embedded systems needing

The 1.8-inch size and SATA III interface make this drive a direct fit for legacy notebooks, industrial PCs or compact appliances that only accept this physical format. Buyers whose hardware requires a 2.5-inch drive, an M.2 module or a higher capacity than 128 GB will need a different part.

1.8-inch form factor decides compatibility

The single specification that determines whether this SSD works is its 1.8-inch physical size combined with the SATA III connector. If the target device does not have a matching 1.8-inch SATA bay, the drive cannot be installed regardless of its performance figures.

주요 특징

  • Read speeds up to 495 MB/s for quick boot times
  • Write speeds up to 191 MB/s for responsive file saves
  • 128 GB capacity stores OS and essential apps
  • 8-inch SATA form factor fits legacy laptops and industrial gear
  • 1,000,000-hour MTBF and 0 °C to 70 °C rating for long service life

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

What do I need in my system for this 1.8-inch SATA III drive to work?

Any Windows or Mac system with a SATA interface will accept the 128GB ACJC2M128S18; the JMicron JMF608 controller and MLC NAND Flash handle the rest.

Can I keep using an older SATA II controller with this SSD?

The drive runs on SATA III at up to 495MB/sec read and 191MB/sec write, and will negotiate down to SATA II speeds if the host controller only supports that standard.

How can I verify the ACJC2M128S18 is healthy after installation?

Enable SMART monitoring in your OS or BIOS; the drive reports temperature (0°C–70°C range), media wear and other health attributes through the standard SMART interface.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.