我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small rectangular 1.8 inch SATA SSD with black circuit board and silver label

KingSpec

KingSpec ACJC2M128S18 128GB 1.8-inch SATA internal SSD

SKU CH-P2XC-BT708 MPN ACJC2M128S18

A 1.8-inch SATA solid-state drive holding 128GB with MLC NAND, delivering read speeds up to 495MB/s and write speeds up to 191MB/s via a JMicron JMF608 controller

  • Read speeds up to 495 MB/s for quick boot times
  • Write speeds up to 191 MB/s for responsive file saves
  • 128 GB capacity stores OS and essential apps
  • 8-inch SATA form factor fits legacy laptops and industrial gear
  • 1,000,000-hour MTBF and 0 °C to 70 °C rating for long service life

KingSpec 128 GB 1.8-inch SATA SSD

This KingSpec ACJC2M128S18 is a 128 GB internal solid-state drive built in the 1.8-inch form factor with a SATA III interface. It uses a JMicron JMF608 controller and MLC NAND flash to deliver sequential reads up to 495 MB/s and writes up to 191 MB/s. The drive is suited to any Windows or Mac system that provides a standard SATA connection.

Suits older laptops and embedded systems needing

The 1.8-inch size and SATA III interface make this drive a direct fit for legacy notebooks, industrial PCs or compact appliances that only accept this physical format. Buyers whose hardware requires a 2.5-inch drive, an M.2 module or a higher capacity than 128 GB will need a different part.

1.8-inch form factor decides compatibility

The single specification that determines whether this SSD works is its 1.8-inch physical size combined with the SATA III connector. If the target device does not have a matching 1.8-inch SATA bay, the drive cannot be installed regardless of its performance figures.

商品特色

  • Read speeds up to 495 MB/s for quick boot times
  • Write speeds up to 191 MB/s for responsive file saves
  • 128 GB capacity stores OS and essential apps
  • 8-inch SATA form factor fits legacy laptops and industrial gear
  • 1,000,000-hour MTBF and 0 °C to 70 °C rating for long service life

商品規格

本商品目前尚未公佈規格。

商品問答

What do I need in my system for this 1.8-inch SATA III drive to work?

Any Windows or Mac system with a SATA interface will accept the 128GB ACJC2M128S18; the JMicron JMF608 controller and MLC NAND Flash handle the rest.

Can I keep using an older SATA II controller with this SSD?

The drive runs on SATA III at up to 495MB/sec read and 191MB/sec write, and will negotiate down to SATA II speeds if the host controller only supports that standard.

How can I verify the ACJC2M128S18 is healthy after installation?

Enable SMART monitoring in your OS or BIOS; the drive reports temperature (0°C–70°C range), media wear and other health attributes through the standard SMART interface.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。