저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black PCIe 5.0 M.2 to U.2 adapter cable with left-exit M.2 connector and 15-pin power, 1.6ft

LetLinkSo

LetLinkSo LLS-CB-1MT1UT-01 PCIe 5.0 M.2 to U.2 Adapter Left Exit 1.6ft

SKU CH-AT09-323Q3

Connects a U.2 NVMe SSD to an M.2 2280 M-key slot with PCIe 5.0 speeds up to 128 Gbps

  • ColorBlack
  • Cable Length1.6ft (50cm)
  • SpecificationsLeft Exit
  • Connector AM.2 M key 2280
  • Connector BSFF-8639(U.2)
  • Connector StyleStraight

Cable Exit Direction Left Exit

  • Connect U.2 NVMe SSD to M.2 slot via PCIe 5.0 adapter
  • Achieve up to 128 Gbps theoretical data transfer rate
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 devices
  • Ready to use with no drivers or software required
  • Requires SATA power cable connection to function

M.2 to U.2 NVMe adapter

This PCIe 5.0 adapter connects a U.2 NVMe SSD to an M.2 2280 M key slot on a motherboard. The cable measures 1.6ft and uses a left exit orientation. It supports theoretical speeds up to 128 Gbps and is backward compatible with PCIe 4.0, 3.0, 2.0 and 1.0 devices. No drivers are required.

Build integration and power

The adapter plugs straight into an available M.2 2280 M key interface and frees the U.2 drive to sit elsewhere in the chassis. A SATA power cable must be connected to the 15-pin power connector on the adapter for the drive to function. The 50cm length suits typical desktop or server layouts.

Upgrade path and limits

This adapter replaces a direct M.2 NVMe installation when a U.2 drive is preferred for capacity or endurance. The jump is worth it when the motherboard has a spare M.2 2280 M key slot and the builder can supply SATA power. It does not serve builds that lack an M.2 M key interface or that need more than four PCIe lanes.

주요 특징

  • Connect U.2 NVMe SSD to M.2 slot via PCIe 5.0 adapter
  • Achieve up to 128 Gbps theoretical data transfer rate
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 devices
  • Ready to use with no drivers or software required
  • Requires SATA power cable connection to function

사양

BrandLetLinkSo
SeriesM.2 to U.2 Adapter
ModelLLS-CB-1MT1UT-01
Part NumberLLS-CB-1MT1UT-01
ColorBlack
Cable Length1.6ft (50cm)
SpecificationsLeft Exit
Connector AM.2 M key 2280
Connector BSFF-8639(U.2)
Connector StyleStraight
FeaturesENHANCED SYSTEM PERFORMANCE
Dimensions20'
Weight1.68 ounces
Package Quantity1
Package ContentsPCIe 5.0 M.2 to U.2 Adapter x 1

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the 128 Gbps PCIe 5.0 link saturate before the U.2 NVMe SSD reaches its rated speed?

The adapter supports PCIe 5.0 x4 at up to 128 Gbps; sustained throughput will be limited by the specific U.2 NVMe SSD you install.

How much heat or noise does the adapter add when the U.2 drive runs continuously?

The passive cable assembly has no fan or active components, so it adds no audible noise and negligible heat beyond the drive itself.

Which power cable must already be present in the system for the adapter to work?

A standard 15-pin SATA power connector from the power supply is required to power the U.2 drive through the adapter.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.