저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 6400 CL52 4Rx4 1.1V ECC RDIMM Supermicro X14SDV-32C-SP3F memory upgrade

SKU CH-38XH-R8SYF

256GB DDR5-6400 ECC RDIMM kit in four 64GB 4Rx4 modules at 1.1V CL52, validated for the Supermicro X14SDV-32C-SP3F motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • 1 V registered ECC design protects data integrity
  • 4Rx4 organisation enables full population on supported boards
  • 288-pin RDIMM form factor matches Supermicro X14SDV-32C-SP3F requirements

Exact-fit DDR5 ECC RDIMM kit

This 256GB kit contains four 64GB DDR5-6400 registered ECC modules built for the Supermicro X14SDV-32C-SP3F motherboard. Each DIMM runs at 1.1V with CL52 latency and a 4Rx4 organisation. The registered design lets the board run fully populated without overloading the memory controller.

4Rx4 registered ECC at 6400 MT/s

The single specification that decides fitment is the 4Rx4 registered ECC profile at DDR5-6400 (PC5-51200). Your motherboard must accept 288-pin RDIMMs with exactly that rank, voltage and timing; a UDIMM, SODIMM or different rank count will not be recognised. Verify the manual’s approved population table before ordering.

Tool-free press-in install

Align the notch on each 288-pin module with the slot key, press straight down until both latches click, and repeat for all four slots in the order the manual specifies. The most common issue is mixing ranks or skipping a required slot sequence, which leaves capacity unrecognised or forces the system to run at a lower speed.

주요 특징

  • 256 GB total capacity from four 64 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • 1 V registered ECC design protects data integrity
  • 4Rx4 organisation enables full population on supported boards
  • 288-pin RDIMM form factor matches Supermicro X14SDV-32C-SP3F requirements

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 6400 MT/s rating mean once the modules are installed in a Supermicro X14SDV-32C-SP3F?

The kit runs at DDR5-6400 (PC5-51200) with CL52 latency at 1.1 V, so the memory controller recognises all 256 GB at the rated speed without down-clocking.

How does the 288-pin RDIMM interface and registered design affect what the motherboard can use?

The board requires 288-pin registered DIMMs; the buffered architecture lets every slot stay fully populated at 64 GB per module while ECC corrects single-bit errors on the fly.

What physical clearance or slot population rules apply when fitting the four 64 GB sticks?

Each module is a standard-height 288-pin RDIMM with no heat spreader; follow the X14SDV-32C-SP3F manual for the approved DIMM population order before installing all four.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.