NEMIX RAM 256GB (2x128GB) DDR5 5600 CL46 4Rx4 ECC RDIMM Supermicro X14SDW-40C-SP9F memory upgrade
- 256GB (2 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256GB DDR5-6400 ECC RDIMM kit in four 64GB 4Rx4 modules at 1.1V CL52, validated for the Supermicro X14SDV-32C-SP3F motherboard
Size 256GB 4X64GB
This 256GB kit contains four 64GB DDR5-6400 registered ECC modules built for the Supermicro X14SDV-32C-SP3F motherboard. Each DIMM runs at 1.1V with CL52 latency and a 4Rx4 organisation. The registered design lets the board run fully populated without overloading the memory controller.
The single specification that decides fitment is the 4Rx4 registered ECC profile at DDR5-6400 (PC5-51200). Your motherboard must accept 288-pin RDIMMs with exactly that rank, voltage and timing; a UDIMM, SODIMM or different rank count will not be recognised. Verify the manual’s approved population table before ordering.
Align the notch on each 288-pin module with the slot key, press straight down until both latches click, and repeat for all four slots in the order the manual specifies. The most common issue is mixing ranks or skipping a required slot sequence, which leaves capacity unrecognised or forces the system to run at a lower speed.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-944K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit runs at DDR5-6400 (PC5-51200) with CL52 latency at 1.1 V, so the memory controller recognises all 256 GB at the rated speed without down-clocking.
The board requires 288-pin registered DIMMs; the buffered architecture lets every slot stay fully populated at 64 GB per module while ECC corrects single-bit errors on the fly.
Each module is a standard-height 288-pin RDIMM with no heat spreader; follow the X14SDV-32C-SP3F manual for the approved DIMM population order before installing all four.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?