SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00495794BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 PC4-25600 ECC RDIMM 1Rx8 CL22 1.2V 288-Pin Supermicro H11SSL-NC EPYC memory upgrade
An 8 GB DDR4 3200 ECC registered DIMM built for Supermicro H11SSL-NC EPYC motherboards
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data errors in critical workloads
- Registered design stabilises signal integrity for server platforms
- 3200 MT/s throughput matches EPYC memory controller specs
- 2 V operation reduces power draw per module
- Validated compatibility with Supermicro H11SSL-NC motherboards
Server ECC RDIMM Upgrade
This 8GB DDR4 3200 registered DIMM adds ECC-protected capacity to a Supermicro H11SSL-NC motherboard running AMD EPYC processors. The module operates at 1.2V with CL22 latency and uses a single-rank 1Rx8 organisation for broad slot compatibility.
Replaces Slower or Smaller Modules
Upgrading from lower-speed DDR4 or non-ECC unbuffered memory is worthwhile when the workload demands error correction and registered signalling for multi-DIMM stability. The jump makes sense for virtualisation hosts, database nodes or NAS appliances that hit capacity limits on the existing configuration.
Tool-Free Slot Installation
The 288-pin RDIMM seats in the standard DDR4 slot without cables or brackets; align the notch, press evenly until the retention clips engage, then verify detection in BIOS. Common issues include mixing registered and unbuffered DIMMs in the same channel or exceeding the per-channel rank limit documented in the motherboard manual.
주요 특징
- ECC protection prevents data errors in critical workloads
- Registered design stabilises signal integrity for server platforms
- 3200 MT/s throughput matches EPYC memory controller specs
- 2 V operation reduces power draw per module
- Validated compatibility with Supermicro H11SSL-NC motherboards
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Does the 288-pin RDIMM fit a Supermicro H11SSL-NC motherboard?
The 288-pin DDR4 RDIMM form factor matches the memory slots on the Supermicro H11SSL-NC AMD EPYC series motherboard.
What is the correct way to seat the 1Rx8 ECC registered module?
Align the notch with the slot key, press down firmly until both retention clips click, then verify the system registers 8 GB at 3200 MT/s with ECC active.
When should the module be replaced if ECC starts logging correctable errors?
Replace the stick once the platform firmware reports a rising correctable-error count that exceeds the vendor threshold, as the 1.20 V DDR4 chips cannot be serviced in place.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
