저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black square 60mm CPU cooler fan with 2-pin connector

OEM Industries

OEM Industries KD1206PHS2 60mm 12V 1.9W 2-Pin CPU cooler

SKU CH-N5KM-C165X

A 60 mm square fan cooler running at 12 V and 1.9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 60 mm frame fits tight chassis
  • 12 V 1.9 W draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • Sleeve bearing runs quietly at idle
  • Square cooler design directs airflow over CPU

Compact 60 mm square cooler

The OEM Industries KD1206PHS2 is a 60 mm square fan designed for direct CPU or case cooling. It runs on 12 V and draws 1.9 W through a two-pin power connector. A sleeve bearing keeps the assembly simple and cost-effective.

Suits tight spaces and low-power builds

This cooler fits small-form-factor chassis or legacy sockets where a 60 mm footprint is required. Builders needing higher airflow, PWM speed control or quiet operation at load should consider larger alternatives.

Mounts in standard 60 mm cut-outs

The fan installs in any 60 mm square mounting pattern without additional brackets. Its two-pin lead connects directly to a motherboard header or fan controller, leaving four-pin headers free for PWM devices. No LED lighting means no extra cables to route.

주요 특징

  • Compact 60 mm frame fits tight chassis
  • 12 V 1.9 W draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • Sleeve bearing runs quietly at idle
  • Square cooler design directs airflow over CPU

사양

ModelKD1206PHS2
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

이 상품에 대한 질문

Does my motherboard need a 2-pin fan header to run the KD1206PHS2 cooler?

Yes, the cooler uses a 2-pin power connector, so your board must provide a matching 2-pin fan header.

Will the 60 mm square frame of this cooler clear the mounting holes on my older socket board?

The cooler has a 60 mm square footprint; check your board’s mounting-hole spacing against those dimensions before installing.

How can I confirm the 12 V 1.9 W fan is spinning correctly after I fit it?

Power the system and verify the fan rotates; you can also monitor the fan speed in the BIOS or a hardware-monitoring utility.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.