We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three green DDR3 ECC RDIMM modules in antistatic bags

A-Tech

A-Tech 12GB (3x4GB) DDR3 1333 ECC RDIMM memory upgrade

SKU CH-CPK7-Q2BR6

12 GB DDR3 1333 ECC RDIMM kit for Apple Mac Pro Mid 2010 and Mid 2012 Xeon models

  • Capacity12GB (3 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor Brand Chipset
  • 12 GB kit for Apple Mac Pro Mid 2010 and 2012
  • DDR3 1333 MHz PC3-10600 ECC registered RDIMM
  • 240-pin form factor with major-brand chips
  • 50 V operation for stable server workloads
  • Lifetime warranty with US-based technical support

What this kit upgrades

This 12 GB kit contains three 4 GB DDR3 1333 registered ECC modules built for the Mac Pro 5,1. It targets owners of the Mid 2010 or Mid 2012 towers who need more memory for virtual machines, rendering or large datasets. The 240-pin RDIMM form factor matches the factory memory slots exactly.

DDR3 1333 registered ECC limits

The Mac Pro 5,1 memory controller runs at 1333 MHz and requires registered ECC DIMMs; unbuffered or non-ECC modules will not be recognised. Each slot accepts a 2Rx4 organisation at 1.50 V, so the three-module kit fills three of the four available channels without exceeding the platform electrical specification.

Compatibility is defined by model ID

Only systems reporting MacPro5,1 (order numbers MD771LL/A, EMC 2314-2 or 2629) with the listed Xeon processors — 2.4, 2.66, 2.93, 3.06 or 3.33 GHz variants — are validated. Machines with different model identifiers, single-core configurations or non-Xeon CPUs cannot use this memory.

Highlights

  • 12 GB kit for Apple Mac Pro Mid 2010 and 2012
  • DDR3 1333 MHz PC3-10600 ECC registered RDIMM
  • 240-pin form factor with major-brand chips
  • 50 V operation for stable server workloads
  • Lifetime warranty with US-based technical support

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Apple Mac RAM Memory Upgrades
Capacity12GB (3 x 4GB)
SpeedDDR3 1333 (PC3 10600)
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset
Compatible SystemApple Mac Systems
FeaturesMajor Brand Chips

Questions about this item

Should I choose the 12GB kit or look for a different capacity for my Mac Pro?

This kit provides 12GB total capacity using three 4GB modules, designed for Mac Pro models from 2010 and 2012 with Xeon processors such as the 2.4GHz E5645 or 3.33GHz W3680.

What does the 1333MHz speed mean once the memory is installed in my Mac Pro?

The modules run at DDR3 1333MHz (PC3-10600), matching the native memory bus speed of the supported Mac Pro systems for full performance without downclocking.

Is the 240-pin RDIMM interface the correct standard for my Mac Pro, and does it limit capacity?

Yes, these are 240-pin DDR3 RDIMMs with ECC registered operation, the exact form factor required by the Mac Pro 5,1; the three-module kit fills three slots for 12GB total.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.