We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks, 260-pin, no heat spreader

A-Tech

A-Tech 16GB (2x8GB) DDR4 3200 ECC SODIMM CL22 1.2V laptop RAM

SKU CH-GPXH-6Z197

Dual-channel 16 GB DDR4 3200 ECC SODIMM kit with CL22 latency and 1.2 V operation for compatible laptops and workstations

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 16GB (2 x 8GB)

Struck-through versions exist but are not stocked here.

Speed DDR4 3200 (PC4 25600)

CAS Latency CL22

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 16 GB kit (2×8 GB) doubles memory bandwidth
  • DDR4 3200 speed with CL22 latency accelerates application response
  • 2 V JEDEC standard voltage reduces power draw and heat
  • 260-pin SO-DIMM form factor fits compatible laptops and microservers

ECC SODIMM Kit for Microservers and Workstations

This 16GB dual-channel kit delivers two 8GB DDR4 3200 modules with ECC unbuffered operation. It targets mobile workstations, microservers and NAS devices that require error-correcting memory in a 260-pin SO-DIMM form factor. Each module runs at 1.2V with a single-rank x8 organisation.

Upgrade from non-ECC or lower-capacity DDR4 SODIMMs

The jump is worthwhile when your platform supports ECC and you need data integrity for server workloads or ZFS storage. Systems limited to 8GB or running slower DDR4 speeds gain both capacity and bandwidth headroom. Boards without ECC support cannot use these modules.

Fits 260-pin DDR4 slots with ECC enabled in BIOS

The kit needs two free SO-DIMM sockets and a memory controller that accepts unbuffered ECC at 3200 MT/s. It frees the builder from mixing mismatched sticks and leaves the DIMM slots populated for dual-channel throughput. No heat spreader is included, so airflow around the modules should be considered.

Highlights

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 16 GB kit (2×8 GB) doubles memory bandwidth
  • DDR4 3200 speed with CL22 latency accelerates application response
  • 2 V JEDEC standard voltage reduces power draw and heat
  • 260-pin SO-DIMM form factor fits compatible laptops and microservers

Specifications

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 8GB 1Rx8 PC4-25600 ECC SODIMM
Part NumberNE-SS-0604
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this kit use the standard 260-pin DDR4 SO-DIMM form factor for laptops?

Yes, both 8 GB modules are 260-pin DDR4 SO-DIMMs that fit the standard laptop memory slot.

What is the correct way to seat the modules so the system recognises both sticks?

Insert each module at an angle until the gold contacts disappear, then press down firmly until the side clips click into place.

Will the ECC feature require any extra configuration or firmware updates later?

ECC operates automatically once the modules are installed in a compatible system; no further setup or maintenance is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.