We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 16GB (4x4GB) DDR3 1600MHz SODIMM CL11 laptop RAM

SKU CH-VPSG-YCR65

Four 4 GB DDR3 SODIMM modules totalling 16 GB at 1600 MHz CL11 for laptop memory upgrades

  • Capacity16GB (4 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Struck-through versions exist but are not stocked here.

CAS Latency CL11

  • 16 GB total capacity from four 4 GB modules
  • DDR3 1600 MHz speed rated as PC3-12800
  • CL11 CAS latency for responsive timing
  • 204-pin SODIMM form factor fits DDR3 laptop slots
  • Non-ECC unbuffered design compatible with AMD and Intel systems

A-Tech 16GB DDR3 SODIMM kit

This A-Tech kit supplies 16GB of DDR3 laptop memory across four 4GB modules. It targets owners of compatible notebooks or all-in-one PCs who want to maximise the supported slot count for multitasking and heavier workloads. The modules run at 1600MHz with CL11 latency and use major-brand DRAM ICs. Buyers who need ECC error correction or registered buffering should look elsewhere.

Verify DDR3 204-pin support and slot count

Before ordering, confirm that your system accepts DDR3 SO-DIMM modules at 1600MHz (PC3-12800) and has four available 204-pin slots. Check the manufacturer’s memory specifications for maximum capacity per slot and total system limit. The kit is non-ECC and unbuffered, so it will not work in platforms that require registered or error-correcting memory. Ensure the BIOS is up to date for full compatibility.

Quad-channel layout with standard SODIMM connectors

Each module uses the standard 204-pin SO-DIMM edge connector and has no heat spreader, keeping the profile low for tight laptop chassis. The quad-channel kit layout means all four sticks are matched for timing and voltage consistency. Major-brand DRAM ICs are used throughout, and every module undergoes quality-assurance testing. The bare green PCB slides directly into the memory slot without extra clearance concerns.

Highlights

  • 16 GB total capacity from four 4 GB modules
  • DDR3 1600 MHz speed rated as PC3-12800
  • CL11 CAS latency for responsive timing
  • 204-pin SODIMM form factor fits DDR3 laptop slots
  • Non-ECC unbuffered design compatible with AMD and Intel systems

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Laptop Memory RAM
ModelA-Tech 16GB (4x4GB) PC3-12800 Laptop RAM Kit
Part NumberNE-SS-0665
Capacity16GB (4 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible
OptionMajor Brand DRAM IC Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the kit contain four 4 GB SODIMMs or do I need to buy extra modules?

The kit includes four 4 GB modules for a total of 16 GB, so no additional sticks are required.

Should I choose the PC3-12800 or PC3-12800S version for my laptop?

Both designations refer to the same DDR3 1600 MHz specification; the kit is rated for PC3-12800 / PC3-12800S and will work with either label.

What does the CL11 latency mean when the memory is installed?

CL11 indicates a CAS latency of 11 cycles at the 1600 MHz data rate, which is the standard timing for this DDR3 SODIMM kit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.