A-Tech 16GB (4x4GB) DDR4 2666MHz CL19 1.2V 260-Pin SODIMM Laptop RAM Kit
- 16GB (4 x 4GB)
- 260-Pin DDR4 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
Quad-channel 16 GB kit of four 4 GB DDR4 2400 MHz SODIMM modules at 1.2 V CL17 for laptop upgrades
Capacity 16GB (4 x 4GB)
Speed DDR4 2400 (PC4 19200)
This A-Tech kit supplies 16 GB of DDR4 memory across four 4 GB SO-DIMM modules. It is built for laptops, notebooks and all-in-one PCs that use 260-pin DDR4 slots and accept CL17 timing at 1.2 V. Buyers who need ECC or registered memory cannot use this kit.
Each module is an unbuffered, non-ECC SO-DIMM that installs directly into compatible DDR4 SO-DIMM sockets. The quad-channel layout populates four slots at once, leaving no empty slots for later expansion on boards limited to four sockets. Systems that support only one or two modules will not accept the full kit.
The kit runs at 2400 MHz (PC4-19200) with CAS latency 17 and standard 1.2 V operation. It handles everyday multitasking, office applications and light content creation within that 16 GB ceiling. Workloads that demand higher capacity, faster speeds or lower latency will exceed what this kit provides.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Laptop Memory RAM |
| Model | A-Tech 16GB (4x4GB) DDR4-2400 Laptop RAM Kit |
| Part Number | NE-SS-0671 |
| Capacity | 16GB (4 x 4GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | AMD & Intel Compatible |
| Option | Major Brand DRAM IC Chips |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is specified at 1.20V with CL17 timings at 2400MHz. Running four modules increases electrical load on the memory controller; stability depends on the laptop's BIOS and memory topology, so verify the platform supports quad-channel DDR4-2400 at 1.20V before installing.
Each module runs at the standard 1.20V DDR4 voltage without a heat spreader. Total power draw is low for DDR4 SODIMMs, so thermal contribution is minimal in typical laptop airflow, but exact watts depend on workload and the specific DRAM ICs used.
The system needs four free 260-pin DDR4 SO-DIMM slots, a memory controller that supports DDR4-2400 (PC4-19200) at 1.20V, and BIOS support for 16GB total capacity in a quad-channel configuration.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?