We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 RDIMM with black chips, 16GB ECC registered server memory

A-Tech

A-Tech 16GB DDR4 2400MHz ECC RDIMM 2Rx4 for Micron MTA36ASF2G72PZ-2G3 Server Memory

SKU CH-CPZQ-VQ00V

16GB DDR4 2400MHz ECC RDIMM 2Rx4 replacement for Micron MTA36ASF2G72PZ-2G3, MTA36ASF2G72PZ-2G3A3, MTA36ASF2G72PZ-2G3B1 server memory

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR4 2400MHz ECC RDIMM boosts server capacity
  • CL17 latency at 1.2V ensures stable registered performance
  • 2Rx4 dual-rank organisation increases memory bandwidth
  • 288-pin DDR4 DIMM fits Micron MTA36ASF2G72PZ-2G3 systems
  • Major-brand chips tested for dependable server operation

16GB DDR4 2400MHz ECC RDIMM

This A-Tech module provides 16GB of DDR4 server memory at 2400MHz with ECC and registered buffering. It uses a 2Rx4 rank configuration and operates at 1.20V with CL17 latency. The 288-pin DIMM is built with major brand chips and serves as a compatible replacement for specific Micron part numbers.

Suits servers needing registered ECC memory

This module fits systems that require DDR4 2400MHz registered DIMMs with error correction. It is not for desktop boards that accept only unbuffered non-ECC memory. Buyers who need a different speed, voltage, or rank layout should look at other modules.

Check your system manual for DDR4 RDIMM support

Verify that your motherboard accepts 288-pin registered ECC DIMMs at 1.20V. Confirm the maximum capacity per slot and the supported memory speeds. Ensure the 2Rx4 organization matches your platform's requirements before ordering.

Highlights

  • 16GB DDR4 2400MHz ECC RDIMM boosts server capacity
  • CL17 latency at 1.2V ensures stable registered performance
  • 2Rx4 dual-rank organisation increases memory bandwidth
  • 288-pin DDR4 DIMM fits Micron MTA36ASF2G72PZ-2G3 systems
  • Major-brand chips tested for dependable server operation

Specifications

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

Does my server need an open 288-pin DDR4 DIMM slot to install this 16GB ECC RDIMM?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor and requires a compatible registered DIMM slot on the motherboard.

Can I mix this 2Rx4 registered ECC module with older unbuffered ECC UDIMMs already in my system?

No, registered RDIMMs and unbuffered UDIMMs cannot be mixed on the same platform; the memory controller must support registered modules.

How can I confirm the module is running at 2400MHz with ECC active after installation?

Check the BIOS or UEFI memory information screen; it should report 2400 MT/s, CL17 timings, 1.20V, and show ECC enabled for the installed DIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.