We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 260-pin DDR4 SODIMM module with black chips, no heat spreader

A-Tech

A-Tech 16GB DDR4 2666 ECC SODIMM 2Rx8 CL19 1.2V

SKU CH-BKSR-YAKTE

16 GB DDR4 2666 ECC SODIMM for Micron MTA18ASF2G72HZ-2G6E1 microserver upgrades

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • 16GB DDR4 2666 ECC SODIMM for data integrity
  • CL19 timing at 1.2V for stable operation
  • 2Rx8 unbuffered layout fits 260-pin slots
  • Tested replacement for Micron MTA18ASF2G72HZ-2G6E1
  • Quality-checked modules for microserver and workstation use

16GB ECC DDR4 SODIMM for Micron replacement

This 16GB DDR4 2666MHz ECC unbuffered SODIMM replaces the Micron MTA18ASF2G72HZ-2G6E1 module in compatible microserver, server, and workstation laptops. It runs at 1.2V with CL19 latency and uses the standard 260-pin SO-DIMM form factor. The module is built as a 2Rx8 configuration for ECC error correction.

Simple SODIMM installation with compatibility checks

Install by powering off the device, opening the memory slot cover, and seating the 260-pin module until the retention clips click. The main issue is purchasing without confirming the system supports ECC unbuffered DDR4 SODIMMs; non-ECC or registered platforms will not work with this module. Verify your hardware manual lists MTA18ASF2G72HZ-2G6E1 or equivalent specs before buying.

Suits ECC microserver and workstation upgrades

This module suits administrators upgrading Micron-compatible microserver or workstation laptops that require ECC unbuffered DDR4 2666MHz memory. It is not for standard consumer laptops lacking ECC support, nor for systems needing registered or load-reduced DIMMs. Builders requiring higher capacities per slot or different voltage specifications should look elsewhere.

Highlights

  • 16GB DDR4 2666 ECC SODIMM for data integrity
  • CL19 timing at 1.2V for stable operation
  • 2Rx8 unbuffered layout fits 260-pin slots
  • Tested replacement for Micron MTA18ASF2G72HZ-2G6E1
  • Quality-checked modules for microserver and workstation use

Specifications

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF2G72HZ-2G6E1
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMTA18ASF2G72HZ-2G6E1
Recommend UseCompatible Replacement for Micron MTA18ASF2G72HZ-2G6E1

Questions about this item

How can I confirm the ECC function is active after installing this 2666 MHz DDR4 SODIMM?

Enter the BIOS or UEFI and verify that ECC is reported as enabled for the 16 GB module; many server boards also log corrected errors in the system event viewer once the 2Rx8 CL19 stick is seated.

What comes in the package and do I need any extra parts to fit this 260-pin module?

The box contains one 16 GB unbuffered ECC SODIMM rated at 1.2 V; no additional brackets, cables or heat spreaders are required for a standard 260-pin laptop or microserver slot.

Which capacity should I choose if my microserver manual lists the Micron MTA18ASF2G72HZ-2G6E1 as supported?

Select the 16 GB version — it is the direct compatible replacement for that Micron part number and matches the 2Rx8 organisation specified for the platform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.