We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge contacts and black memory chips

A-Tech

A-Tech 16GB DDR4 3200 CL22 SODIMM 260-pin laptop RAM

SKU CH-R7GG-9RDTR

16GB DDR4 3200 SODIMM module for HP L68533-001, L67710-001 and L33267-001 laptops

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity lets you run more apps at once
  • 3200 MHz DDR4 speed moves data faster for snappier response
  • CL22 latency keeps timing tight for stable operation
  • 2 V standard voltage reduces power draw and heat
  • 260-pin SO-DIMM form factor fits compatible HP laptop slots

16GB DDR4 3200 SODIMM for HP laptops

This 16GB DDR4 3200 CL22 module replaces HP part numbers L68533-001, L67710-001 and L33267-001. It suits notebooks and all-in-one PCs that accept 260-pin SO-DIMM memory. The single stick delivers 16GB capacity for everyday multitasking and faster application loading. Builders needing ECC or registered memory should look elsewhere.

DDR4 3200 speed and CL22 timing limits

The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 cycles at 1.20V. Systems that only support lower DDR4 speeds will downclock the stick automatically. Platforms requiring higher frequencies or tighter latencies cannot extract more from this part. The 2Rx8 organisation is fixed and cannot be changed.

260-pin unbuffered stick without heat spreader

A standard 260-pin SO-DIMM edge connector fits the laptop slot directly; no adapter is needed. The bare green PCB has no heat spreader, keeping the profile slim for tight chassis. Unbuffered non-ECC design matches mainstream consumer platforms. Verify your system's maximum supported capacity and slot count before purchase.

Highlights

  • 16 GB capacity lets you run more apps at once
  • 3200 MHz DDR4 speed moves data faster for snappier response
  • CL22 latency keeps timing tight for stable operation
  • 2 V standard voltage reduces power draw and heat
  • 260-pin SO-DIMM form factor fits compatible HP laptop slots

Specifications

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL68533-001, L67710-001, L33267-001
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesL68533-001, L67710-001, L33267-001
Recommend UseCompatible Replacement for HP L68533-001, L67710-001, L33267-001

Questions about this item

Should I choose the 16GB module or look for a different capacity for my HP laptop?

This listing is a single 16GB module; match it to the HP part numbers L68533-001, L67710-001 or L33267-001 and your system's maximum supported capacity.

What does the 3200MHz rating mean once the SODIMM is installed?

The module is rated at DDR4 3200 (PC4-25600); your laptop's memory controller will set the actual operating frequency up to that limit.

Is the 260-pin DDR4 SO-DIMM interface compatible with my HP laptop's memory slot?

Yes, it uses the standard 260-pin DDR4 SO-DIMM form factor at 1.2V, unbuffered and non-ECC, matching the HP part numbers listed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.