We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 256GB (8x32GB) DDR4 2400 ECC LRDIMM 2Rx4 server RAM

SKU CH-34MA-J4MD5

Eight 32 GB DDR4 2400 ECC load-reduced DIMMs deliver 256 GB of registered server memory with CL17 latency at 1.2 V

  • Capacity256GB (8 x 32GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced

Capacity 256GB (8 x 32GB)

  • 256 GB total capacity from eight 32 GB modules
  • ECC load-reduced design protects data integrity in servers
  • Dual-rank x4 organisation increases memory density per channel
  • DDR4 2400 MHz speed with CL17 latency for responsive throughput
  • Standard 1.2 V operation matches DDR4 server specifications

256 GB DDR4 ECC LRDIMM kit

This 256 GB kit contains eight 32 GB DDR4 2400 MHz modules built for servers and workstations that require ECC load-reduced memory. The dual-rank x4 organisation and registered buffer suit multi-socket platforms needing large capacities per channel. It is not compatible with desktop or laptop computers. Verify your system's qualified vendor list before purchase.

Sustained throughput with ECC LRDIMM

Load-reduced DIMMs reduce electrical load on the memory bus, allowing all eight modules to run at the rated 2400 MHz under continuous workloads without the signal degradation seen on standard registered DIMMs at high population. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute jobs. CL17 latency at 1.20 V keeps power draw predictable across fully populated channels.

288-pin build quality and daily handling

Each module uses major-brand chips mounted on a 288-pin PCB tested through A-Tech's validation process before shipping. The LRDIMM form factor fits standard DDR4 server slots but requires motherboard support for load-reduced operation; mixing with RDIMM or UDIMM is not supported. Handle modules by the edges and seat firmly until the ejector clips latch to ensure reliable contact in vibration-prone rack environments.

Highlights

  • 256 GB total capacity from eight 32 GB modules
  • ECC load-reduced design protects data integrity in servers
  • Dual-rank x4 organisation increases memory density per channel
  • DDR4 2400 MHz speed with CL17 latency for responsive throughput
  • Standard 1.2 V operation matches DDR4 server specifications

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 32GB 2Rx4 PC4-2400T-L
Capacity256GB (8 x 32GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2Rx4 (2DRx4)
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.20V DDR4 2400 kit draw under sustained server loads?

Each module runs at the standard 1.20V DDR4 voltage; total system draw depends on the platform's memory controller and how many of the eight 32GB LRDIMMs are populated.

What must my motherboard provide to run these 288-pin ECC LRDIMMs?

The board needs DDR4 server memory slots that support 288-pin LRDIMMs with ECC and load-reduced signalling; desktop or laptop platforms will not accept them.

Will the 2Rx4 dual-rank modules work alongside older single-rank DDR4 DIMMs I already have?

Mixing 2Rx4 LRDIMMs with single-rank DIMMs is platform-dependent; consult the server or workstation manual for qualified population rules before combining them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.