A-Tech 256GB (8x32GB) DDR4 2133MHz ECC RDIMM 2Rx4 1.2V CL15 server RAM
- 256GB (8 x 32GB)
- DDR4 2133 (PC4 1700…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
Eight 32 GB DDR4 2400 ECC LRDIMM modules provide 256 GB of quad-rank server memory at 1.2 V
Capacity 256GB (8 x 32GB)
This 256GB kit contains eight 32GB modules built for servers and workstations that require DDR4 ECC Load Reduced DIMMs. It is not compatible with desktop or laptop computers. Each module runs at DDR4 2400 with CL17 latency and standard 1.20V operation. The quad-rank 4Rx4 organisation suits platforms designed for high-density registered memory.
Load Reduced DIMMs reduce electrical loading on the memory bus, allowing all eight modules to operate at rated speed without the signal degradation that limits standard registered DIMMs at high population. ECC corrects single-bit errors in real time, maintaining data integrity during continuous workloads. The 1.20V supply keeps power draw predictable across full channels. CL17 timing delivers consistent latency under heavy multi-threaded demand.
Every module uses a 288-pin DIMM form factor with major-brand chips tested to A-Tech quality standards. The 4Rx4 quad-rank layout fits server boards that support Load Reduced memory topology. Installation follows the system manual's channel and population rules for optimal throughput. The kit ships new with a lifetime warranty and US-based technical support.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 32GB 4Rx4 PC4-2400T-L |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 (4DRx4) |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each module operates at the standard DDR4 voltage of 1.20 V. Load-reduced DIMMs lower the electrical load on the memory bus, which helps keep power draw and heat lower than equivalent quad-rank registered DIMMs under sustained server workloads.
The system must accept DDR4 ECC load-reduced DIMMs, provide 288-pin slots wired for quad-rank x4 modules, and have a memory controller qualified for 4Rx4 population rules at 2400 MHz.
Mixing load-reduced and registered DIMMs is not supported; the memory controller treats them as different technologies. All slots should be populated with identical 4Rx4 LRDIMMs for stable operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?