We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 SODIMM modules without heat spreaders

A-Tech

A-Tech 32GB (4x8GB) DDR5 4800MHz SODIMM CL40 1.1V 262-Pin Laptop RAM Kit

SKU CH-PFYM-1M5WT

Quad-channel 32 GB DDR5 laptop kit at 4800 MHz with CL40 latency and 1.1 V operation

  • Capacity32GB (4 x 8GB)
  • Type262-Pin DDR5 SO-DIMM
  • SpeedDDR5 4800 (PC4 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Capacity 32GB (4 x 8GB)

Struck-through versions exist but are not stocked here.

Speed DDR5 4800 (PC4 38400)

Struck-through versions exist but are not stocked here.

CAS Latency CL40

Struck-through versions exist but are not stocked here.

  • 32 GB total capacity across four 8 GB modules
  • DDR5 4800 MHz speed for faster data throughput
  • CL40 latency at standard 1.1 V operation
  • 262-pin SODIMM form factor fits compatible laptops
  • Non-ECC unbuffered design suited for consumer systems

Kit overview

This A-Tech kit delivers 32 GB of DDR5 laptop memory in a matched set of four 8 GB SODIMM modules. It runs at the standard DDR5 4800 MT/s speed with CL40 latency and 1.10 V operation, using major-brand DRAM ICs on unbuffered, non-ECC boards. The 262-pin form factor fits current DDR5-compatible laptops, notebooks and all-in-one PCs.

Who it suits

Builders upgrading a DDR5 platform to the full 32 GB capacity supported by many modern mobile chipsets will benefit from the quad-channel configuration. Users who require error-correcting code memory, registered modules or lower CAS latency should look at other product lines, as this kit is strictly non-ECC unbuffered with CL40 timing.

Deciding specification

The single figure that determines fitment is the 262-pin DDR5 SODIMM interface; only systems designed for this exact socket will accept the modules. Verify your device’s memory specifications before ordering to confirm DDR5 4800 support.

Highlights

  • 32 GB total capacity across four 8 GB modules
  • DDR5 4800 MHz speed for faster data throughput
  • CL40 latency at standard 1.1 V operation
  • 262-pin SODIMM form factor fits compatible laptops
  • Non-ECC unbuffered design suited for consumer systems

Specifications

BrandA-Tech
SeriesA-Tech DDR5 Laptop Memory RAM
ModelA-Tech 32GB (4x8GB) DDR5-4800 Laptop RAM Kit
Part NumberNE-SS-0684
Capacity32GB (4 x 8GB)
Type262-Pin DDR5 SO-DIMM
SpeedDDR5 4800 (PC4 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible
OptionMajor Brand DRAM IC Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 262-pin DDR5 SODIMM modules and what step is commonly missed?

Align the notch on each 262-pin module with the slot key, insert at a slight angle, then press down firmly until both side clips click; the step often missed is verifying all four clips are fully latched before closing the chassis.

What maintenance or replacement will the 32GB DDR5 4800MHz kit need over time?

No scheduled maintenance is required; if a module fails, replace it with another DDR5 4800 CL40 1.1V 262-pin SODIMM of the same capacity to keep quad-channel operation intact.

What limit appears first when the 4x8GB DDR5 4800 kit runs sustained heavy workloads?

The CL40 latency at 4800MHz sets the throughput ceiling; under continuous load the memory controller will hit that timing boundary before voltage or thermal limits become a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.