We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular 288-pin DDR5 server memory module with black chips no heat spreader

A-Tech

A-Tech 32GB DDR5 5600 ECC RDIMM 2Rx8 server RAM

SKU CH-F009-S3T65

32 GB DDR5 5600 ECC registered DIMM with 2Rx8 organisation and 1.1 V operation

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity handles heavy server workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive tasks
  • ECC RDIMM registered design corrects errors to protect data integrity
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 10 V DDR5 standard voltage reduces power draw per module

Server DDR5 5600 ECC RDIMM

This 32 GB DDR5 module runs at 5600 MT/s with a CAS latency of 40 and operates at the standard 1.10 V. It uses a 288-pin registered DIMM form factor with a 2Rx8 rank layout and on-board ECC for data integrity in server and workstation platforms.

Thermals and power

The module has no heat spreader and draws power only through the DIMM slot at the JEDEC-defined 1.10 V. Registered buffering reduces electrical load on the memory controller, keeping system power draw predictable during sustained workloads.

Build integration

The single 32 GB stick fits any DDR5 RDIMM slot that supports 5600 speeds and registered ECC memory. It leaves remaining channels free for additional capacity but cannot be used in systems that require unbuffered UDIMMs or non-ECC modules.

Highlights

  • 32 GB capacity handles heavy server workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive tasks
  • ECC RDIMM registered design corrects errors to protect data integrity
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 10 V DDR5 standard voltage reduces power draw per module

Specifications

BrandA-Tech
SeriesCompatible Replacement for Micron MTC20F2085S1RC56BD1 MTC20F2085S1RC56BD2 MTC20F2085S1RC56BG1
ModelA-Tech 32GB DDR5-5600 ECC RDIMM Server RAM Module
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Questions about this item

How do I install this 288-pin DDR5 RDIMM and which step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the module is fully seated in the correct channel per the system manual.

What maintenance or replacement will this ECC RDIMM need over time?

No scheduled maintenance is required; if a correctable error count rises or the module fails, replace the affected 32 GB stick.

What limit appears first during sustained workloads on this 5600 MHz module?

The CAS latency of 40 cycles at 1.1 V sets the timing boundary before thermal throttling becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.