We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 8GB (2x4GB) DDR4 2133 MHz ECC SODIMM laptop RAM

SKU CH-5DRH-MCFZQ

Dual-channel 8 GB DDR4 ECC SODIMM kit running at 2133 MHz with CL15 latency and 1.2 V operation

  • Capacity8GB (2 x 4GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • 8GB (2 x 4GB)
  • 4GB
  • ECC protection prevents data errors in critical workloads
  • Dual-channel 8 GB kit with two 4 GB modules
  • DDR4 2133 MHz speed rated at PC4-17000
  • Low 1.20 V voltage reduces power draw
  • 260-pin SO-DIMM form factor fits compatible laptops

8 GB DDR4 ECC SODIMM kit

This A-Tech kit supplies eight gigabytes of DDR4 error-correcting laptop memory in two four-gigabyte modules. It is built for microservers, mobile workstations and NAS units that require ECC unbuffered SO-DIMMs. The dual-channel layout helps throughput in compatible platforms.

Replaces non-ECC or single-channel DDR4 SODIMMs

Systems that support ECC gain data-integrity protection when moving from standard modules to this kit. The upgrade is worthwhile when the platform explicitly lists ECC unbuffered SO-DIMM support and the workload demands error correction.

Fits 260-pin DDR4 SO-DIMM slots at 1.2 V

Installation requires a board that accepts DDR4 2133 MHz ECC unbuffered modules and follows the vendor's channel-population rules. The kit frees the system from single-module bandwidth limits and adds ECC coverage without raising voltage.

Highlights

  • ECC protection prevents data errors in critical workloads
  • Dual-channel 8 GB kit with two 4 GB modules
  • DDR4 2133 MHz speed rated at PC4-17000
  • Low 1.20 V voltage reduces power draw
  • 260-pin SO-DIMM form factor fits compatible laptops

Specifications

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2133P-T ECC SODIMM RAM Kit
Part NumberNE-SS-1624
Capacity8GB (2 x 4GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips / ECC Error Correcting Technology
Recommend UseAMD & Intel Compatible
OptionMajor Brand DRAM IC Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 260-pin DDR4 SO-DIMM form factor fit my laptop's memory slots?

Yes, the kit uses the standard 260-pin DDR4 SO-DIMM form factor required by laptops and microservers that accept DDR4 ECC SODIMM modules.

What is the correct way to seat both 4GB modules for dual-channel operation?

Insert each module at an angle until the gold contacts are fully hidden, then press down firmly until the side clips click; the step most people miss is verifying both clips lock simultaneously.

Will the ECC unbuffered modules require any firmware updates or periodic reconfiguration?

No, ECC unbuffered memory operates transparently once installed; the system handles error correction automatically without user maintenance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.