WRIARICH NVME to USB Adapter 10Gbps USB 3.1 Gen 2 M.2 NVME 2230 2242 2260 2280 Hard Drive Adapter
- Black
- SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
ASUS
240 mm liquid cooler with dual 120 mm ARGB fans, PWM control up to 2000 RPM, and Intel LGA 115x/1200/1366 plus AMD AM4 mounting
The ASUS TUF GAMING LC 240 ARGB Demon Slayer Limited Edition is a closed-loop liquid cooler built for mainstream desktop processors. It targets gamers and builders who want integrated ARGB lighting with AURA SYNC support and a themed aesthetic. The unit fits Intel LGA 115x, 1200, 1366 and AMD AM4 sockets. It arrives pre-filled and maintenance-free.
The 272 x 122 x 27 mm aluminum radiator pairs with two 120 mm TUF GAMING ARGB fans running at 800 to 2000 RPM. They deliver 67 CFM airflow and 3.0 mmH2O static pressure at 29 dB(A) noise. This capacity handles typical mid-range CPU loads comfortably; sustained heavy all-core workloads on high-TDP chips may exceed its dissipation limit.
This cooler replaces factory box coolers and entry-level 120 mm liquid coolers, offering lower temperatures and quieter operation under load. The jump is worthwhile when your current cooler throttles the CPU or produces objectionable noise. It does not suit builders needing larger radiator surface area or support for newer socket platforms not listed.
| Brand | ASUS |
|---|---|
| Series | TUF Gaming |
| Memory Size | 12GB |
| Memory Type | DDR |
| Cooler | Triple Fans |
The cold row measures 272 x 122 x 27 mm and uses two 120 x 120 x 25 mm fans, so verify your case supports a 240 mm radiator and has clearance for 25 mm thick fans.
Connect the pump to a CPU fan header and the ARGB cable to a 4-pin 12V RGB header; the pump should run at 800-2000 RPM and the lighting will sync via AURA SYNC software.
The box contains the pre-greased water block, two 120 mm ARGB fans, screw and bracket kit, 1-to-2 fan splitter, 1-to-3 RGB splitter and a quick start guide; you only need a motherboard with a 4-pin 12V RGB header.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?