Athena Power AP-U1ATX40P8 400W 1U server power supply
- Single
- 400W
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Athena Power
A 1U 600W server power supply with ATX, EPS, PCIe, SATA and Molex connectors, 80+ Bronze efficiency and 100,000-hour MTBF
The Athena Power AP-U1ATX6022FEP8 delivers 600W in a 1.59-inch tall chassis that fits standard 1U server enclosures. It targets system integrators who need a compact, high-density unit for rackmount workstations or storage nodes. The wide 88 to 264 VAC input range supports global deployment without voltage switching.
An 80+ Bronze rating means the unit converts mains power with reduced waste heat during typical server loads. MTBF is rated at 100,000 hours at full load and 25 °C, indicating a design optimised for continuous operation. Hold-up time of 17 ms at nominal input helps ride through brief mains interruptions.
The cable set includes one 24-pin ATX, one 4-pin P4, one 8-pin EPS, one 6-pin and one 6+2-pin PCIe, three SATA and three Molex plugs. This mix covers a single-processor motherboard, a mid-range GPU and multiple drive bays in one harness. Builders needing dual EPS or additional PCIe cables for multi-GPU configurations will find the complement insufficient.
| Brand | Athena Power |
|---|---|
| Model | AP-U1ATX6022FEP8 |
| Maximum Power | 600W |
| Main Connector | ATX Connector 24 (20+4) Pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 Pin PCIE 6 Pin x 1 PCIE 6+2 Pin SATA 15 Pin x 3 Molex 4 Pin x 3 |
| Output | +5V(20A) +3.3V(18A) +12V1(24A) +12V(24A) -12V(1.0A) -5V(N/A) +5V_SB(3.5A) |
| Input Voltage | 88 ~ 264 Volts AC |
| Input Frequency Range | 47 - 63 Hz |
| MTBF | 100,000 Hours on Maximum Load at +25 degree C |
| Hold-up Time | 17 ms Minimum at Nominal Input Voltage |
| Features | Rise time: Less than 20 ms |
| Dimensions | 1.59" x 3.94" x 8.66"(H x W x L) |
| Weight | 4.50lbs |
| Temperature | Operating: 0 degree C ~ +50 degree C on Full Load Storage & Shipping: -20 degree C ~ +80 degree C |
| Shipping weight | 1.96 kg |
| Package size | 312 × 206 × 97 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Slide the 1.59" high unit into the bay, secure it with the four chassis screws, then plug the 24-pin ATX, 8-pin EPS, 4-pin P4, PCIe 6-pin, PCIe 6+2-pin, three SATA 15-pin and three Molex 4-pin cables; the step often missed is connecting both the 8-pin EPS and the 4-pin P4 for dual-CPU boards.
The internal fan is the only moving part; expect to clean dust from the intake every 6-12 months and plan a full unit replacement around the 100,000-hour MTBF mark at 25°C ambient.
The operating temperature ceiling of 50°C is reached first; beyond that the protection circuitry shuts the unit down to prevent overheating.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?