We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

be quiet!

be quiet! Dark Power 13 1000W ATX 3.0 power supply BN661

SKU CH-ST9J-H6EC4 MPN BN661

Fully modular 1000 W ATX 3.0 unit with 80 PLUS Titanium efficiency, PCIe 5.0 support, a frameless Silent Wings fan and an overclocking key for rail switching

  • ColorBlack
  • TypeATX 3.0 Compatible
  • Maximum Power1000 W
  • Fans1
  • PFCActive
  • Main Connector20+4 Pin

Option Dark Power 13

Capacity 1000W

Struck-through versions exist but are not stocked here.

  • 80 PLUS Titanium efficiency up to 95.2% reduces power draw and heat
  • ATX 3.0 compliance with PCIe 5.0 support ready for next-gen GPUs
  • Frameless Silent Wings fan delivers virtually inaudible operation
  • Overclocking key toggles between four 12V rails or one massive rail
  • Fully modular cables with 13 SATA connectors simplify builds

1000 W ATX 3.0 power supply

The Dark Power 13 BN661 delivers 1000 W of continuous power with 80 PLUS Titanium efficiency up to 95.2 percent. It meets ATX 3.0 specifications and supports PCIe 5.0 graphics cards through four 6+2 pin connectors. A frameless Silent Wings fan and full-mesh front panel keep noise to a minimum. The unit is fully modular for clean cable routing.

Check ATX 3.0 readiness and cable needs

Verify that your motherboard accepts the 20+4 pin main connector and that the case can fit a 175 mm deep unit. Ensure the four 6+2 pin PCIe cables match your graphics card requirements and count the 13 SATA connectors against your drive count. The overclocking key lets you choose between four 12 V rails or a single 12 V rail before installation. Input voltage covers 100 to 240 V at 50 or 60 Hz.

Sustained-load behaviour and protection

At full load the Titanium-rated design keeps waste heat low, helping the fan stay near its quietest speed. Active rectifier plus full-bridge LLC topology maintains tight voltage regulation on the 12 V, 5 V and 3.3 V rails during long sessions. Over-voltage and overload protection circuits engage if limits are exceeded. Standby power draw remains below 0.1 W when the system is off.

Highlights

  • 80 PLUS Titanium efficiency up to 95.2% reduces power draw and heat
  • ATX 3.0 compliance with PCIe 5.0 support ready for next-gen GPUs
  • Frameless Silent Wings fan delivers virtually inaudible operation
  • Overclocking key toggles between four 12V rails or one massive rail
  • Fully modular cables with 13 SATA connectors simplify builds

Specifications

Brandbe quiet
ColorBlack
TypeATX 3.0 Compatible
Maximum Power1000 W
Fans1
PFCActive
Main Connector20+4 Pin
+12V Rails4
PCI-Express Connector4 x 6+2 Pin
SATA Power Connector13
Max PSU Length175 mm
ModularYes
Energy-Efficient80 PLUS TITANIUM Certified
Over Voltage ProtectionYes
Overload ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current14A @ 115V, 7A @ 230V
Frequency Range50/60 Hz
+3.3V Max. Current25A
+5V Max. Current25A
+12V1 Max. Current32A
+12V2 Max. Current32A
+12V3 Max. Current40A
+12V4 Max. Current40A
-12V Max. Current0.5A
+5VSB Max. Current3A
12V Power Connector1 x 4+4 Pin ATX/EPS 12V, 1 x 8 Pin EPS 12V
Floppy Connector1
Peripheral Connector5
Fans Total Quantity1
Top Fans Size135mm
Over Load ProtectionYes
Short Circuit ProtectionYes
Under Voltage ProtectionYes
Over Current ProtectionYes
Over Power ProtectionYes
Over Temperature ProtectionYes
Shipping weight4.63 kg
Package size349 × 273 × 121 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 1000W unit fit in a case that only allows power supplies up to 175 mm long?

Yes, the housing is exactly 175 mm deep so it matches that limit.

Can I run a PCIe 5.0 graphics card without using an adapter cable?

The PSU is ATX 3.0 compliant and includes native 12VHPWR support for PCIe 5.0 GPUs.

How many SATA drives can I power simultaneously with the included cables?

Thirteen SATA power connectors are provided, allowing up to thirteen drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.