We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 server memory module with black chips and silver label

Brute Networks

Brute Networks 16GB DDR4-2933 ECC Registered RDIMM 2Rx8 1.2V

SKU CH-NATX-7TN5Q

16 GB DDR4-2933 ECC registered RDIMM with 2Rx8 organisation and 1.2 V operation for Dell-compatible servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR4-2933 capacity for demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • 2Rx8 organisation maximises density per memory channel
  • 2V operation reduces power draw and heat output
  • Dell 370-ADMZ equivalent ensures drop-in compatibility

Dell-compatible 16GB DDR4-2933 ECC RDIMM

This Brute Networks module is a 16GB DDR4-2933 ECC Registered DIMM built to match Dell part 370-ADMZ. It uses a 288-pin layout and runs at 1.2V with a 2Rx8 organisation. The stick is intended for servers that require registered ECC memory and accept PC4-23400 speeds.

Verify DDR4 RDIMM support and rank limits

Before ordering, confirm that your server platform accepts DDR4 Registered DIMMs with ECC and can address 2Rx8 modules at 2933 MT/s. Check the system documentation for maximum supported capacity per slot and total populated ranks per channel. Ensure the memory controller is configured for 1.2V operation and that the BIOS revision in use recognises third-party modules equivalent to Dell 370-ADMZ.

Standard voltage and registered buffering

At 1.2V the module operates at the standard DDR4 voltage, so power draw per stick is modest in typical server workloads. The registered buffer adds one clock cycle of latency but reduces electrical load on the memory controller, helping signal integrity in dense configurations. Thermals and acoustic output are governed by the server chassis airflow rather than the DIMM itself.

Highlights

  • 16GB DDR4-2933 capacity for demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • 2Rx8 organisation maximises density per memory channel
  • 2V operation reduces power draw and heat output
  • Dell 370-ADMZ equivalent ensures drop-in compatibility

Specifications

BrandDell
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset

Questions about this item

What comes in the box with the 16GB DDR4-2933 RDIMM and do I need to buy anything else?

The module itself is supplied; no cables, brackets or additional components are included or required for installation.

Should I choose the 2Rx8 registered ECC version or a different rank or voltage for my Dell server?

This 16GB 2Rx8 1.20V registered ECC DDR4-2933 matches Dell part 370-ADMZ and is built with major-brand chips for direct compatibility.

What does the PC4-23400 rating mean for real-world throughput in a server?

PC4-23400 denotes the module's peak data rate of 2933 MT/s, the maximum speed the memory controller can transfer data per pin.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.