We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Brute Networks

Brute Networks 8GB DDR4-2933 1Rx8 ECC Registered RDIMM server RAM

SKU CH-TPYW-SXJ3B

8GB DDR4-2933 ECC registered RDIMM with 1Rx8 layout and 1.20V operation, Dell 370-AESD compatible

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR4-2933 capacity for demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • 2V operation reduces power draw and heat output
  • Dell 370-AESD compatible for drop-in server upgrades
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

Dell Compatible 8GB DDR4-2933 ECC RDIMM

This 288-pin registered module delivers 8GB of DDR4 memory at 2933 MT/s with ECC error correction. It operates at 1.2V and uses a 1Rx8 organisation built from major-brand chips. The stick is designed as a drop-in equivalent to Dell part 370-AESD for supported PowerEdge servers.

Thermals and power draw at rated speed

Running at the specified 2933 MT/s and 1.2V, the module stays within standard DDR4 power limits for registered DIMMs. ECC and register logic add minimal overhead, so typical server airflow handles the heat without extra cooling. No active cooling or raised voltage is required for normal operation.

Behaviour under sustained load

The registered buffer and on-die ECC maintain signal integrity during continuous read-write cycles, preventing soft errors that can accumulate over long workloads. Major-brand DRAM ensures consistent timing across matched modules in multi-channel configurations. Lifetime warranty covers the module for the duration of its service life.

Highlights

  • 8GB DDR4-2933 capacity for demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • 2V operation reduces power draw and heat output
  • Dell 370-AESD compatible for drop-in server upgrades
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

Specifications

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Questions about this item

How do I install this 288-pin DDR4 RDIMM and what step do people miss?

Align the notch on the module with the slot key, press firmly until both side clips click shut, and verify the system recognises the full 8GB at 2933 MT/s in BIOS.

What maintenance or replacement will this ECC registered module need later?

No routine maintenance is required; if a correctable error count rises or the module fails, replace it with an identical 1Rx8 1.20V DDR4-2933 RDIMM to keep matched pairs.

What limit appears first when this 1.20V registered DIMM runs sustained workloads?

The memory controller’s maximum supported DDR4-2933 speed and the 1Rx8 rank density set the bandwidth ceiling before voltage or thermal limits are reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.