We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks in a matched pair

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz CL9 Non-ECC DIMM memory upgrade for Dell Precision T3600

SKU CH-4YF8-PKEBR

16 GB DDR3 1333 MHz non-ECC DIMM kit validated for Dell Precision T3600 workstations

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB kit (2×8 GB) doubles capacity for Dell Precision T3600
  • DDR3 1333 MHz CL9 timing matches system spec for stable operation
  • Non-ECC unbuffered DIMM installs directly into the four available slots
  • 5 V standard voltage works with factory power delivery
  • 240-pin form factor ensures physical fit in the workstation

System-specific upgrade for Dell Precision T3600

This 16 GB kit contains two 8 GB DDR3 modules built to match the Dell Precision Workstation T3600. The unbuffered non-ECC DIMMs install directly into the four available sockets without configuration changes. It is not for systems that require registered ECC memory or for builders mixing registered and unbuffered modules in the same machine.

Capacity and headroom within the workstation

The kit provides 16 GB total and the platform supports a maximum of 64 GB across its four slots, leaving room for a second identical kit if more memory is needed later. Each module runs at 1333 MHz with CL9 timings at the standard 1.5 V. It is not for users who need capacities beyond 64 GB or who require ECC error correction for data-integrity workloads.

DDR3 1333 MHz CL9 specification

The decisive figure is the DDR3 1333 MHz (PC3 10600) speed combined with CL9 latency and 1.5 V operation on 240-pin unbuffered DIMMs. Matching these parameters ensures the workstation recognises both modules at full speed without manual timing adjustments. It is not for platforms limited to lower DDR3 speeds or for boards that only accept registered DIMMs.

Highlights

  • 16 GB kit (2×8 GB) doubles capacity for Dell Precision T3600
  • DDR3 1333 MHz CL9 timing matches system spec for stable operation
  • Non-ECC unbuffered DIMM installs directly into the four available slots
  • 5 V standard voltage works with factory power delivery
  • 240-pin form factor ensures physical fit in the workstation

Specifications

BrandComputer Memory Solutions
ModelCM10246410600DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Precision Workstation T3600
Package Content2 Memory RAM Sticks

Questions about this item

Will these 2x8GB DDR3-1333 CL9 modules run at rated speed alongside my existing 4GB sticks in the T3600?

Yes — the kit is validated for the Precision T3600 and will operate at DDR3-1333 CL9 when installed in the remaining slots.

How can I confirm the memory is running at 1333 MHz with CL9 timings after installation?

Open Task Manager or CPU-Z; both will show each module at 1333 MHz and 9-9-9 timing if the BIOS has applied the correct SPD profile.

Does the package contain only the two 8 GB DIMMs, or are any brackets or cables included?

The box holds exactly two 240-pin DDR3 DIMMs; no brackets, cables or additional hardware are supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.