We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 DIMM sticks with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 32GB (2x16GB) DDR4 2400 19200 CL17 Non-ECC DIMM C114

SKU CH-1QAS-68199

32 GB DDR4 kit (2 × 16 GB) at 2400 MHz CL17, validated for Gigabyte X99 Gaming motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 32 GB dual-channel kit doubles usable memory
  • 2400 MHz DDR4 speed matches board specification
  • CL17 low latency improves response time
  • 2 V operation reduces power draw
  • Guaranteed fit for Gigabyte X99 Gaming motherboards

System-Specific 32GB DDR4 Kit

This 32GB kit contains two 16GB DDR4 2400 modules built for Gigabyte X99 Gaming 5, 5P, 7 WiFi and G1 WiFi motherboards. It targets owners of those boards who need a matched pair to reach 32GB without mixing sticks.

Straightforward DIMM Installation

Each stick is a standard 288-pin unbuffered DIMM that seats in the board's DDR4 slots; no heat spreader means low-profile clearance for tall CPU coolers. The usual issue is populating all eight slots — the board may drop the speed below 2400 MHz or require a BIOS update to stabilise four ranks per channel.

DDR4 2400 Platform Limits

The X99 platform officially supports DDR4 2400, so this kit runs at its rated 19200 MT/s without overclocking. Four sticks per channel at CL17 can stress the memory controller, and a 32-bit operating system will not show the full 32GB capacity. Maximum supported memory on these boards is 128GB across eight sockets.

Highlights

  • 32 GB dual-channel kit doubles usable memory
  • 2400 MHz DDR4 speed matches board specification
  • CL17 low latency improves response time
  • 2 V operation reduces power draw
  • Guaranteed fit for Gigabyte X99 Gaming motherboards

Specifications

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemGigabyte GA-X99-Gaming 5, GA-X99-Gaming 5P, GA-X99-Gaming 7 WiFi, GA-X99-Gaming G1 WiFi Motherboards
Package Content2 Memory RAM Sticks

Questions about this item

How can I confirm the kit is running at the rated DDR4 2400 speed and CL17 timings after installation?

Enter the motherboard BIOS or use a system-information tool such as CPU-Z to verify the memory frequency reads 2400 MHz and the timings show 17-17-17 at 1.2 V.

What exactly ships in the C114 package and is anything else required for installation?

The box contains two 16 GB 288-pin DDR4 DIMM modules; no additional cables, brackets or software are needed — just insert them into the motherboard slots.

Which capacity option should I choose for a Gigabyte GA-X99-Gaming 5 motherboard that supports up to 128 GB across eight slots?

This 32 GB (2 x 16 GB) kit fills two of the eight slots and leaves room to add more modules later up to the 128 GB maximum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.