We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SODIMM modules with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333 CL7 1.5V SODIMM memory upgrade

SKU CH-9S75-DWEHT

8GB DDR3 1333 CL7 1.5V SODIMM kit upgrades HP G62 notebooks with two 4GB modules

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB kit lets 64-bit systems use full memory capacity
  • CL7 timing at 1333MHz reduces latency for responsive multitasking
  • 5V DDR3 SO-DIMM matches HP G62 notebook voltage spec
  • 204-pin unbuffered modules install in both G62 memory slots
  • Computer Memory Solutions validates compatibility for G62-355Ca, G62-355Dx, G62-357Ca

8GB DDR3 SODIMM kit for HP G62 notebooks

This kit provides 8 GB of DDR3 memory in two 4 GB modules for HP G Notebook G62-355Ca, G62-355Dx and G62-357Ca systems. It uses 204-pin SO-DIMM form factor and operates at 1.5 V. The modules are unbuffered, non-ECC and carry a CL7 timing of 7-7-7.

Capacity and headroom for 32-bit and 64-bit systems

A 32-bit operating system can address only 4 GB, so the full 8 GB requires a 64-bit OS. With 4 GB installed the system may recognise 3.5 GB or less depending on configuration. Systems based on the Intel GL40 chipset support a maximum of 4 GB.

DDR3-1333 interface limited by memory bus speed

The modules are rated for DDR3-1333 (PC3-10600) but the memory bus may run at 1066 MHz (PC3-8500) depending on the processor. The kit is also compatible with DDR3-1066 (PC3-8500) operation. Buyers needing higher bandwidth or a different DDR generation cannot use this kit.

Highlights

  • 8GB kit lets 64-bit systems use full memory capacity
  • CL7 timing at 1333MHz reduces latency for responsive multitasking
  • 5V DDR3 SO-DIMM matches HP G62 notebook voltage spec
  • 204-pin unbuffered modules install in both G62 memory slots
  • Computer Memory Solutions validates compatibility for G62-355Ca, G62-355Dx, G62-357Ca

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp G Notebook G62-355Ca, G62-355Dx, G62-357Ca
Package Content2 Memory RAM Sticks

Questions about this item

Will this DDR3 1333 CL7 kit run at full speed if my HP G62 notebook currently uses DDR3 1066 modules?

The system bus may drop to 1066 MHz depending on the processor, so the modules will operate at the lower speed even though they are rated for 1333 MHz.

How can I confirm both 4 GB sticks are recognised after installation?

Boot into the BIOS or open System Information in a 64-bit OS; you should see 8 GB total with both 204-pin SODIMM slots populated.

Does the package include anything besides the two memory sticks?

The box contains only the two 4 GB DDR3 SODIMM modules; no tools, adapters or documentation are supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.