We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM10246412800SODRL 8GB DDR3L 1600 HP ENVY m6-w101dx m6-w105dx memory upgrade

SKU CH-FRMQ-AWX62

8GB DDR3L 1600 SODIMM upgrade for HP ENVY m6-w101dx and m6-w105dx notebooks

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • 8 GB capacity expands multitasking headroom for HP ENVY m6
  • 1600 MHz DDR3L speed matches factory memory timing
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits factory slots exactly
  • CL11 latency keeps response tight under load

Compatibility Targeted Memory Upgrade

This 8 GB DDR3L SODIMM module is built to match the exact specifications of HP ENVY m6-w101dx and m6-w105dx notebooks. It operates at 1600 MHz with CL11 timing and runs at the required 1.35 V low voltage. The single stick installs directly into the 204-pin slot without configuration changes.

Suitable Buyers And Limitations

Owners of the listed ENVY models who need to reach the 16 GB maximum across two sockets will find this module a direct fit. Buyers whose laptops require ECC registered memory, a different DDR generation, or a higher density than 8 GB per slot should look elsewhere. Systems with only one memory socket cannot use this upgrade.

Deciding Specification

The module uses DDR3L technology at 1.35 V rather than standard 1.5 V DDR3, and the notebook's memory controller must support this lower voltage for stable operation. Verifying that the target system specifies DDR3L or PC3L 12800 is the single check that confirms compatibility before purchase.

Highlights

  • 8 GB capacity expands multitasking headroom for HP ENVY m6
  • 1600 MHz DDR3L speed matches factory memory timing
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits factory slots exactly
  • CL11 latency keeps response tight under load

Specifications

BrandComputer Memory Solutions
ModelCM10246412800SODRL
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP ENVY m6-w101dx, m6-w105dx, ENVY m6 (4th Gen Intel
Package Content1 Memory RAM Stick

Questions about this item

Will the 1600 MHz rating actually run at that speed in my HP ENVY m6-w101dx?

The module is rated DDR3L 1600 (PC3L 12800) and will operate at 1600 MHz if the notebook's memory controller supports that frequency; otherwise it will down-clock to the highest speed the platform allows.

Is the DDR3L 1.35 V module compatible with the DDR3 slots in the m6-w105dx?

Yes, DDR3L is backward-compatible with standard DDR3 slots; the 204-pin SO-DIMM fits the same socket and will run at 1.35 V or 1.5 V depending on the system.

Does the 204-pin SO-DIMM fit the two memory sockets in the ENVY m6 (4th Gen Intel)?

The stick uses the standard 204-pin SO-DIMM form factor, matching the two expansion sockets in the ENVY m6 series for a straightforward installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.