OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Computer Memory Solutions
A 64GB quad-channel DDR3L 1600 ECC registered kit for Intel S2600 server boards
This 64GB kit contains four 16GB DDR3L 1600 modules built for Intel S2600CO, S2600CP, S2600CP2 and S2600CP4 server boards. Each stick runs at 1.35V with CL11 11-11-11 timings and 2Rx4 registered ECC. It targets administrators who need maximum capacity per channel on these platforms.
Registered ECC buffering reduces electrical load on the memory controller during continuous operation. The supplier notes that DDR3-1333 modules clock down to 1066MHz or 800MHz depending on the Xeon model and bank population. Quad-rank DIMMs in the first triple-channel bank run at 1066MHz; adding them to a second bank drops speed to 800MHz.
The platform supports up to 512GB across 16 sockets per CPU or 8 sockets with two CPUs. This kit fills four slots at 16GB each, leaving room for further expansion within the chipset limits. It is not for systems that require unbuffered ECC only or that cannot accept registered modules. Mixing registered and unbuffered ECC is not supported.
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM20487212800ECCR2R4L |
| Capacity | 64GB (4 x 16GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Intel S2600CO, S2600CP, S2600CP2, S2600CP4 |
| Package Content | 4 Memory RAM Sticks |
Each module operates at 1.35V, lower than standard DDR3, reducing power draw and heat in 24/7 server workloads.
This kit is validated for Intel S2600CO, S2600CP, S2600CP2 and S2600CP4 server boards with 240-pin DDR3 slots.
The board will clock all modules to the lowest common speed; mixing 1600MHz sticks with 1066MHz or 1333MHz DIMMs forces the faster kit down to the slower rate.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?