We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM5127210600ECCR2R4H 16GB (4x4GB) DDR3 1333 ECC Registered DIMM

SKU CH-BM76-FEQHD

16 GB ECC registered DDR3-1333 quad-channel kit validated for ASRock EP2C602 servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB quad-channel kit for ASRock EP2C602 servers
  • ECC registered DDR3-1333 with CL9 timing
  • 5 V operation for standard server DIMM slots
  • 2Rx4 organisation on major-brand chipsets
  • 4 × 4 GB modules install in matched quads

16GB ECC Registered DDR3 Kit

This 16GB kit contains four 4GB DDR3 1333 modules built to the PC3 10600 standard. Each stick is a 240-pin registered DIMM with ECC and a 2Rx4 organisation. The kit is validated for ASRock EP2C602-2TS6/D16 and EP2C602-4L/D16 server platforms.

Quad-Channel Population Rule

The system requires modules to be installed in matched quads to enable quad-channel operation. Mixing registered and unbuffered ECC types is not supported, and x4 plus x8 ranks must not share the same bank. This kit provides a single matched quad for one processor socket.

128GB Registered Ceiling

The platform accepts up to 128GB of registered DIMMs across four or eight sockets, so this 16GB kit leaves ample headroom for further matched quads. With an E5-1600 series CPU only one socket is usable, limiting total registered capacity to the sockets wired to that processor.

Highlights

  • 16 GB quad-channel kit for ASRock EP2C602 servers
  • ECC registered DDR3-1333 with CL9 timing
  • 5 V operation for standard server DIMM slots
  • 2Rx4 organisation on major-brand chipsets
  • 4 × 4 GB modules install in matched quads

Specifications

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemASRock Server EP2C602-2TS6/D16, EP2C602-4L/D16
Package Content4 Memory RAM Sticks

Questions about this item

What does 1333 MHz mean for real-world throughput in my server?

The kit runs at DDR3-1333 with CL9 9-9-9 timing and 1.5 V, delivering PC3-10600 rated bandwidth per module when installed in the supported ASRock EP2C602 platforms.

What does PC3-10600 actually limit in this registered ECC kit?

PC3-10600 sets the DDR3-1333 data rate and the registered ECC protocol caps you to quad-channel population rules — modules must be installed in matched quads on the EP2C602-2TS6/D16 or EP2C602-4L/D16.

Will these 240-pin DIMMs fit the memory slots on my EP2C602 board?

Yes, each stick is a 240-pin DDR3 registered DIMM keyed for the server DIMM sockets on the ASRock EP2C602-2TS6/D16 and EP2C602-4L/D16.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.