WRIARICH NVME to USB Adapter 10Gbps USB 3.1 Gen 2 M.2 NVME 2230 2242 2260 2280 Hard Drive Adapter
- Black
- SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cooler Master
Four 120 mm sleeve-bearing fans move 44.73 CFM at 19.1 dBA with 3-pin connectors
This kit contains four 120mm case fans designed for quiet system cooling. Each unit spins at 1200 RPM to deliver 44.73 CFM of airflow while producing only 19.1 dBA of noise. The sleeve bearing is rated for 30000 hours of operation. Power is supplied through a standard 3-pin connector at 12VDC.
Builders seeking a silent, low-cost way to populate multiple case mounts will appreciate the ultra-low acoustic profile. The fixed 1200 RPM speed suits constant-airflow configurations without software tuning. Systems requiring PWM speed curves, higher static pressure for dense radiators, or addressable lighting should consider alternative models.
The single specification that decides suitability is the non-adjustable 1200 RPM operating point. It locks both the 44.73 CFM airflow and the 19.1 dBA noise floor, so the fans cannot be slowed for quieter idling or sped up for heavier loads. Verify that your motherboard headers and thermal targets match this constant output before purchasing.
| Brand | COOLER MASTER |
|---|---|
| Series | Silent Fan |
| Model | R4-S2S-124K-GP |
| Fan Counts | 4 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Sleeve |
| RPM | 1200 RPM +/- 10% |
| Air Flow | 44.73 CFM |
| Noise Level | 19.1 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Features | Higher air flow to enhance cooling performance. Ultra silent operation at 19 dBA. Economic solution for perfect performance. RoHS compliance for protecting the environment. Voltage: 12VDC Current: 0.15A Input: 1.8W Air pressure: 1.65 mmH2O Fan Life Expectancy: 30,000 hrs Weight: 0.26 lb. |
| Dimensions | 120.00 x 120.00 x 25.00mm |
| Shipping weight | 0.52 kg |
| Package size | 152 × 127 × 108 mm |
Each fan uses a sleeve bearing rated for 30,000 hours of continuous operation, so the four-pack should run for years under normal daily use before any bearing service is required.
The 3-pin connectors lock every fan to a fixed 12 V supply, capping speed at 1200 RPM ±10 % and airflow at 44.73 CFM per fan with no PWM headroom for extra demand.
Total power draw is 1.8 W per fan at 12 V and 0.15 A, while each unit emits 19.1 dBA, so the combined thermal load stays low and the acoustic profile remains barely audible in a typical case.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?