Silverstone Technology PP07E-MBW-V2 24pin ATX extension cable
- Accessories
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Corsair
Compact liquid cooler with integrated 120 mm blower exhausting heat at 1800 RPM while fitting Mini-ITX builds
The Corsair H5 SF Mini is a closed-loop liquid cooler built for high-performance CPUs in cases where a full-sized Hydro Series unit will not fit. It uses a copper cold plate with pre-applied thermal compound, flexible low-permeability tubing and a 200 mm × 168 mm × 87 mm copper radiator cooled by a single 120 mm blower fan that exhausts heat out of the chassis.
This cooler fits Intel LGA 1200, 115X, 1366 and 2011 platforms plus AMD AM4, AM3, AM2, FM1 and FM2 sockets, making it a drop-in upgrade for many older compact builds. Builders using newer socket generations or who want RGB lighting will not find those features here, and the single 120 mm blower limits thermal headroom compared with dual-fan radiators.
The integrated high-pressure blower spins at 1800 RPM, delivering 24 CFM of airflow and 2.5–8.3 mm-H₂O static pressure while operating at 36–42 dBa. This single fan both cools the liquid and pulls air across the motherboard, so the cooler’s total dissipation capacity is defined by this blower’s performance envelope.
| Brand | CORSAIR |
|---|---|
| Series | Hydro Series |
| Part Number | H5 SF Mini |
| Type | Liquid Cooling System |
| Block Compatibility - AMD | AM4,AM3, AM2,FM1,FM2 |
| Block Compatibility - Intel | LGA1200, 115X, 1366, 2011 |
| Block Material | Copper |
| Radiator Size | 200mm × 168mm × 87mm |
| Radiator Material | Copper |
| Fan Size | 1 Fan Slot (120 mm) |
| Fan RPM | 1800 RPM |
| Fan Noise | 36 - 42 dBa |
| Color | Black |
| LED Color | None |
The radiator measures 200 mm by 168 mm by 87 mm and uses a single 120 mm × 32 mm blower fan, so verify your case has a 120 mm rear or top exhaust slot with at least 87 mm clearance behind it.
Use the supplied LGA1200 bracket, place the pre-applied thermal compound side down, and tighten the four thumbscrews in a cross pattern until snug — do not force them past finger-tight or the cold plate can bow.
The sealed loop is maintenance-free for the cooler's lifespan; tubing is non-serviceable and the unit carries no refill port, so replacement means swapping the entire cooler if performance degrades.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?