Cudy
Cudy GS1005P 5-port Gigabit PoE+ switch 60W
Five-port Gigabit PoE+ switch delivers 60 W total power, up to 30 W per port, with VLAN isolation, 250 m extend mode and watchdog auto-recovery
- Switch Typemanaged, fixed configuration
- Formatdesktop, wall mountable
- Standardsieee 802.3i, ieee 802.3u, ieee 802.3ab, ieee 802.3af, ieee 8
- Network Management Typesmart
- Uplink Ports1
- Uplink InterfaceRJ45
- Powers IP cameras and APs with 30 W per port
- 60 W total PoE budget runs multiple devices simultaneously
- Extend mode reaches 250 m at 10 Mbps
- VLAN isolation blocks client-to-client traffic
- Plug-and-play desktop or wall-mount setup
Five-port PoE+ switch for small networks
The Cudy GS1005P 2.0 is a desktop or wall-mountable smart switch that delivers power and data over four Gigabit RJ45 PoE+ ports. It targets installers who need to run access points, IP cameras or digital signage without separate power adapters. A single non-PoE uplink port connects the switch to the router or core network.
Plug-and-play integration with VLAN and Extend modes
The unit draws its own power from an external supply and provides a 60 W total PoE budget across the four primary ports. Enable VLAN mode to isolate downlink ports so clients only talk to the uplink, or switch to Extend mode to reach devices up to 250 m away at 10 Mbps. No management software is required for basic operation.
30 W per port with 60 W total headroom
Each PoE+ port can supply up to 30 W, enough for most IEEE 802.3at devices, while the 60 W aggregate limit means four fully loaded ports will exceed the budget. The 0.375 MB packet buffer and 10 Gbps back-plane bandwidth handle burst traffic, but the switch lacks SNMP and offers only smart management features.
Highlights
- Powers IP cameras and APs with 30 W per port
- 60 W total PoE budget runs multiple devices simultaneously
- Extend mode reaches 250 m at 10 Mbps
- VLAN isolation blocks client-to-client traffic
- Plug-and-play desktop or wall-mount setup
Specifications
| Brand | Cudy |
|---|---|
| Model | GS1005P 2.0 |
| Part Number | GS1005P |
| Switch Type | managed, fixed configuration |
| Format | desktop, wall mountable |
| Standards | ieee 802.3i, ieee 802.3u, ieee 802.3ab, ieee 802.3af, ieee 802.3at |
| Network Management Type | smart |
| Uplink Ports | 1 |
| Uplink Interface | RJ45 |
| Uplink Speed | 1 gbps |
| Primary Port Count | 4 |
| Primary Ports | 4 x Gigabit RJ45 PoE + 1 x Gigabit RJ45 |
| Primary Port Speed | 10/100/1000 Mbps |
| MAC Address Table | 2048 |
| VLAN Support | Yes |
| Jumbo Frames | 15360 |
| Buffer Memory | 0.375 MB |
| Protocols | 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3x Flow Control, 802.3af PoE, 802.3at PoE |
| PoE | Yes |
| SNMP | no |
| QoS | No |
| LACP | No |
| Layer | layer 2 |
| Port Mirroring | No |
| Module Support | No |
| Cloud Access | No |
| Sports Team | 20 packs |
| Sports League | Cudy |
| PoE Ports | 4 x PoE |
| Power | DC 54V |
| Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% - 90%, non-condensing |
| Shipping weight | 0.72 kg |
| Package size | 203 × 178 × 102 mm |
Questions about this item
How much total PoE power does the GS1005P provide before ports start limiting?
The switch supplies 60 W of total PoE budget across its four powered ports.
Does the GS1005P have a fan that runs continuously during all-day operation?
The unit is fanless, so it operates silently with passive cooling.
What uplink connection does the switch need from my existing router?
A single Gigabit RJ45 uplink port connects the switch to your router.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
NVIDIA
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…
$1,770.99$2,021.99−12%
0.02262928BTC
In stock