We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A silver 2.5 inch Dell enterprise SSD with SAS connector

DELL

DELL 3.2TB SAS MU TLC 2.5 SSD KPM6XVUG3T20 CPO

SKU CH-HVNX-RHAZ0

3.2 TB enterprise SAS SSD with 12/24 Gbps dual-port interface for mixed-use server workloads

  • InterfaceSAS
  • 2 TB capacity for data-intensive workloads
  • 12/24 Gbps SAS interface for high-speed transfers
  • Mix-use TLC endurance for balanced read/write performance
  • 5 inch form factor fits dense server bays
  • Validated across Dell PowerEdge R630, R730, R740XD2 and more

Enterprise SSD for mixed-use server workloads

This Dell 3.2TB SAS drive uses TLC NAND to balance read and write performance in mixed-use server workloads. The 2.5-inch form factor fits standard hot-swap bays in compatible PowerEdge platforms. It is built for environments that need consistent throughput across both random reads and sustained writes.

Dual-rate 12/24Gbps SAS interface

The drive operates at 12Gbps or 24Gbps SAS speeds depending on the backplane and controller in use. This dual-rate capability is the single specification that determines whether the SSD can deliver its rated bandwidth in a given chassis. Verify that your controller and expander support 24Gbps to unlock the higher transfer rate.

Low heat output in typical operation

Enterprise TLC SSDs of this class generate modest heat under mixed-use loads and require only standard server airflow. No moving parts mean silent operation, and power draw scales with queue depth rather than spinning media. The drive stays within normal thermal limits when installed in supported PowerEdge systems with adequate front-to-back cooling.

Highlights

  • 2 TB capacity for data-intensive workloads
  • 12/24 Gbps SAS interface for high-speed transfers
  • Mix-use TLC endurance for balanced read/write performance
  • 5 inch form factor fits dense server bays
  • Validated across Dell PowerEdge R630, R730, R740XD2 and more

Specifications

BrandDell
ModelKPM6XVUG3T20, NKM7P
InterfaceSAS

Questions about this item

How does the 3.2 TB capacity translate to usable space in a RAID array?

A 3.2 TB drive provides its full rated capacity to the RAID controller; usable space depends on the RAID level chosen, such as RAID 5 or RAID 6 overhead.

What does the 12/24 Gbps SAS interface mean for actual throughput?

The drive supports both 12 Gbps and 24 Gbps SAS link speeds; the controller negotiates the highest speed both ends support, capping real-world throughput at that negotiated rate.

Will this 2.5 inch drive fit directly into a PowerEdge R760 front bay?

Yes, the 2.5 inch form factor matches the drive bays in the listed PowerEdge R760 and other compatible servers; a Dell carrier is required for hot-plug installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.