We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive bare unit non hot-swap

DELL

DELL 400-AIYM 1.8TB 2.5" SAS 10000 RPM 12Gb/s Non Hot-Swap internal hard drive

SKU CH-0S8T-6QW23

A 1.8TB 2.5" SAS drive spinning at 10000 RPM with a 12Gb/s interface for non hot-swap bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor2.5"
  • High-capacity 1.8 TB storage for demanding workloads
  • Fast 10 000 RPM spindle speeds reduce data-access latency
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • Compact 2.5-inch form factor fits dense server bays
  • Non hot-swap tray design for fixed internal installations

Dell 400-AIYM 1.8TB SAS Drive

The Dell 400-AIYM is a new 1.8TB internal hard drive with a 2.5 inch form factor. It connects via a SAS interface operating at 12Gb/s and spins at 10000 RPM. The drive is supplied as a bare unit without a hot-swap tray.

Suits SAS 12Gb/s Bays

This drive fits servers or storage arrays that accept a 2.5 inch SAS device at 12Gb/s and provide a fixed mounting point for non hot-swap installation. It is not for systems that only support hot-swap trays, or for controllers limited to lower SAS link speeds.

12Gb/s SAS Interface Decides Fit

The single specification that decides compatibility is the 12Gb/s SAS interface. The host backplane or controller must support this exact signalling rate and the physical SAS connector. A mismatch here means the drive will not function in the target system.

Highlights

  • High-capacity 1.8 TB storage for demanding workloads
  • Fast 10 000 RPM spindle speeds reduce data-access latency
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • Compact 2.5-inch form factor fits dense server bays
  • Non hot-swap tray design for fixed internal installations

Specifications

BrandDell
Model400-AIYM
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor2.5"

Questions about this item

Does the 2.5" 400-AIYM need a 3.5" adapter tray to mount in a desktop bay?

The drive is a 2.5" form factor, so a 3.5" adapter bracket is required to secure it in a standard desktop drive bay.

How do I install the 12Gb/s SAS 400-AIYM without hot-swap support?

Power down the system, connect the SAS data and power cables directly to the drive, secure it in the bay, then configure the drive in the RAID controller BIOS before the OS loads.

What part of the 10000 RPM 400-AIYM wears out first and needs monitoring?

The mechanical spindle motor and actuator bearings wear over time; monitor SMART reallocated sector counts and seek error rates to anticipate replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.