We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL 400-AUSL 2.4TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-4GJW-2WSJC MPN 400-AUSL

2.4 TB SAS internal hard drive with 10 000 RPM spindle speed and 12 Gb/s interface for fast data access

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity2.4TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 4TB capacity stores large datasets
  • 10000 RPM spindle speed enables fast data access
  • SAS 12Gb/s interface delivers high transfer rates
  • 512e format works with Windows Server 2008 R2 and later
  • 5 inch hot-plug form factor fits dense server bays

Capacity and interface

The Dell 400-AUSL is a 2.4TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s interface standard. It uses a 512e disk format and arrives as a bare drive with hot-plug capability for compatible Dell systems.

Server and array builders

This drive suits administrators expanding SAS-based storage arrays or replacing failed units in Dell PowerEdge servers where 512e support is confirmed. Buyers whose operating environment does not support 512e drives, or who require a non-SAS interface, should look elsewhere.

512e format constraint

The single specification that decides fitment is the 512e disk format; VMware does not support it, Windows Server 2008 R2 or later and some Linux distributions do, while 4Kn drives need Windows Server 2012 and UEFI boot.

Highlights

  • 4TB capacity stores large datasets
  • 10000 RPM spindle speed enables fast data access
  • SAS 12Gb/s interface delivers high transfer rates
  • 512e format works with Windows Server 2008 R2 and later
  • 5 inch hot-plug form factor fits dense server bays

Specifications

BrandDell
Model400-AUSL
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity2.4TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"
Shipping weight0.68 kg
Package size140 × 89 × 51 mm

Questions about this item

Does the 12Gb/s SAS interface actually run at 12Gb/s in this drive?

The drive uses a SAS 6Gb/s interface, so the 12Gb/s standard is supported by the controller but the drive itself caps at 6Gb/s.

Will this 2.5-inch drive fit a standard 3.5-inch desktop bay?

The drive has a 2.5-inch form factor and requires a 2.5-inch bay or an adapter bracket to mount in a 3.5-inch slot.

Is any jumper or firmware step needed before hot-swapping this Dell drive?

The drive supports hot-plug operation and uses a 512e format; no jumpers are required, but the OS must support 512e drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.