We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive with green circuit board visible

DELL

DELL 401-ABHQ 2.4 TB 2.5" SAS 12Gb/s 10000 rpm internal hard drive

SKU CH-EAN0-GVZB0

A 2.4 TB 2.5" SAS 12Gb/s internal hard drive spinning at 10000 rpm with hot-swap support

  • InterfaceSAS 12Gb/s
  • Capacity2.4TB
  • Form Factor2.5"
  • 4 TB capacity expands server storage
  • 10000 rpm spindle speed accelerates data access
  • SAS 12Gb/s interface enables fast transfers
  • 5 inch form factor fits dense bays
  • Hot-swappable design allows drive replacement without downtime

Dell 401-ABHQ 2.4 TB SAS Drive

The Dell 401-ABHQ is a 2.4 TB internal hard drive built for 2.5-inch bays. It uses a SAS interface operating at 12 Gb/s and spins at 10000 rpm. This new drive is designed to increase storage capacity in compatible servers or workstations. Hot-swap capability supports quick replacement without system downtime.

Suits SAS arrays needing 10k speed

This drive fits systems that accept 2.5-inch SAS drives and require 10000 rpm performance. It works well in Dell PowerEdge servers or similar enterprise chassis with hot-swap backplanes. Buyers whose chassis only supports 3.5-inch bays cannot install this 2.5-inch form factor. It is also unsuitable for environments limited to slower spindle speeds or different interface standards.

12 Gb/s SAS interface decides fit

The single specification that determines compatibility is the 12 Gb/s SAS interface. Your controller or backplane must support this exact standard for the drive to function. A 6 Gb/s SAS or other interface will not provide the correct connection. Verify the system documentation for 12 Gb/s SAS support before purchase.

Highlights

  • 4 TB capacity expands server storage
  • 10000 rpm spindle speed accelerates data access
  • SAS 12Gb/s interface enables fast transfers
  • 5 inch form factor fits dense bays
  • Hot-swappable design allows drive replacement without downtime

Specifications

BrandDell
InterfaceSAS 12Gb/s
Capacity2.4TB
Form Factor2.5"

Questions about this item

How do I install the 2.5" SAS 12Gb/s drive into a hot-swap bay without damaging the connector?

Slide the 401-ABHQ into the 2.5" hot-swap tray until the SAS connector seats firmly; the tray handle locks it in place. The step people miss is pushing evenly on both sides so the 12Gb/s port aligns before the latch clicks.

What maintenance or replacement will the 10000 rpm drive need later?

The 2.40 TB SAS drive has no user-serviceable parts; plan to replace the unit once SMART attributes report reallocated sectors or the 10000 rpm spindle shows increased latency.

What limit appears first when the 2.4 TB drive runs sustained writes?

The 12Gb/s SAS interface and 10000 rpm spindle set the sustained-throughput ceiling; the drive will hit its maximum sequential write rate before thermal throttling engages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.