We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 3.5 inch SATA hard drive in a silver metal caddy

DELL

Dell Constellation ES.3 ST4000NM0033 4TB 7200RPM 3.5" SATA internal hard drive with Gen13 caddy

SKU CH-F1FB-V7ZXV

A 4TB 7200RPM 3.5" SATA internal hard drive with 64MB cache and a Gen13 server caddy for PowerEdge R230, R330, R430, R530, R630, R730, R730xd, R930, T330, T430 and T630

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 64 MB cache buffers burst workloads
  • SATA 6 Gb/s interface connects to standard controllers
  • Gen13 caddy fits PowerEdge R230 R330 R430 R530 R630 R730 R730xd R930 T330 T430 T630

Dell Constellation ES.3 4TB SATA drive

The Dell Constellation ES.3 ST4000NM0033 is a 4000GB internal hard drive spinning at 7200RPM with a 64MB buffer. It connects through a 3.5" SATA 6Gb/s interface and ships new with a PowerEdge Gen13 server caddy included. This unit is built for 3.5-inch drive bays in compatible Dell servers.

Suits PowerEdge Gen13 bays; not for non-Dell trays

This drive fits Dell PowerEdge R230, R330, R430, R530, R630, R730, R730xd, R930, T330, T430 and T630 servers using the supplied Gen13 caddy. Builders without a Gen13 chassis or users needing a different form factor should look at other storage options. The bundled tray is specific to these Dell models.

4000GB capacity decides fit for cold storage

The single specification that determines suitability is the 4000GB capacity on a 7200RPM SATA interface. This size targets bulk data, archives and nearline workloads rather than high-IOPS applications. Verify the capacity matches your array plan before installing into a supported Gen13 bay.

Highlights

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 64 MB cache buffers burst workloads
  • SATA 6 Gb/s interface connects to standard controllers
  • Gen13 caddy fits PowerEdge R230 R330 R430 R530 R630 R730 R730xd R930 T330 T430 T630

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or noise does the 7200RPM ST4000NM0033 produce when running continuously in a server?

The 7200RPM spindle and 64MB cache generate typical enterprise drive heat and acoustic levels; ensure your chassis airflow matches Dell's thermal guidelines for the installed bay.

What must my system provide for the SATA 6Gb/s interface and 3.5-inch form factor to work?

A free 3.5-inch drive bay, a SATA data cable, a SATA power connector from the PSU, and a motherboard or controller with a SATA 6Gb/s port.

Will the included Gen13 caddy fit my older PowerEdge R630 or T430 without modification?

Yes, the supplied caddy is built for Gen13 chassis including the R630 and T430, so it slides directly into the hot-swap bay of those models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.