Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030606BTC
In stock
DELL
DELL G377T 1 TB 3.5" 7200 RPM 32 MB SATA internal hard drive
3.5-inch SATA desktop drive with 7200 RPM spindle speed and 32 MB cache for server workloads
- PackagingBare Drive
- InterfaceSATA
- Capacity1TB
- RPM7200 RPM
- Cache32MB
- FeaturesHard Drive
- 1 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive data access
- 32 MB buffer smooths burst workloads
- SATA 300 interface fits standard desktop bays
- 5 inch form factor suits server chassis
Purpose-built server storage
The Dell G377T is a 1 TB 3.5-inch internal hard drive built for server workloads that demand steady throughput. Its 7200 RPM spindle speed and 32 MB buffer suit always-on environments where large sequential reads and writes are common.
Capacity and headroom
One terabyte provides room for operating-system images, logs and bulk data sets without frequent volume management. The SATA/300 interface caps sustained transfer at 300 MB/s, so very high-throughput arrays will saturate the link before the platters do.
Build integration
The bare-drive packaging fits any standard 3.5-inch bay and connects through a single SATA data and power cable. No extra controllers or adapters are required, freeing PCIe slots for other expansion cards in dense chassis.
Highlights
- 1 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive data access
- 32 MB buffer smooths burst workloads
- SATA 300 interface fits standard desktop bays
- 5 inch form factor suits server chassis
Specifications
| Brand | Dell |
|---|---|
| Model | g377t |
| Packaging | Bare Drive |
| Interface | SATA |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Features | Hard Drive |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Questions about this item
Will the G377T 1 TB 7200 RPM SATA drive work with a motherboard that only has SATA/300 ports?
Yes, the G377T uses the SATA/300 interface standard and is designed for standard 3.5-inch SATA internal connections on desktop motherboards.
How can I verify the G377T 1 TB drive is operating correctly after installation?
The system BIOS should detect the 1 TB capacity and the drive should spin at 7200 RPM; run the manufacturer diagnostic tool to confirm the 32 MB buffer and SATA/300 link speed.
The G377T is listed as a bare drive — what exactly is included and what must I buy separately?
The package contains only the 3.5-inch 1 TB hard drive; you must supply your own SATA data cable, SATA power cable from the PSU, and 3.5-inch mounting screws for the chassis.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
