We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive bare unit

DELL

DELL GT7MT 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-DKWV-H34W1

A 1.2TB 2.5" SAS drive spinning at 10000 RPM with a 12Gb/s transfer rate for high-speed enterprise storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 2 TB capacity stores large datasets and applications
  • 10 000 RPM spindle delivers fast data access
  • SAS interface supports 12 Gb/s transfer rate
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

Dell GT7MT 1.2TB SAS Hard Drive

The Dell GT7MT is a 1.2TB 2.5-inch internal hard drive that spins at 10000 RPM and connects through a SAS interface. It is built for desktop systems and servers that require high-speed mechanical storage in a small form factor. The drive arrives as a bare unit without a tray or bracket. Its 12Gb/s transfer rate supports demanding read and write workloads.

Suits SAS bays needing 10K speed

This drive fits 2.5-inch SAS drive bays that can handle 10000 RPM operation and a 12Gb/s link. Systems limited to slower SAS speeds or smaller capacities will not use the full performance. Buyers who need a larger capacity, a different physical size, or a non-SAS interface should look elsewhere. The bare drive packaging means a compatible carrier is required for installation.

12Gb/s SAS interface decides compatibility

The single specification that determines fit is the 12Gb/s SAS interface. The host controller and backplane must support this exact protocol and speed for the drive to operate correctly. A mismatched interface will prevent the drive from being recognised or limit it to a lower transfer rate. Verify the system documentation for SAS 12Gb/s support before purchase.

Highlights

  • 2 TB capacity stores large datasets and applications
  • 10 000 RPM spindle delivers fast data access
  • SAS interface supports 12 Gb/s transfer rate
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

Specifications

BrandDell
ModelGT7MT
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Questions about this item

Will the 1.2TB SAS 12Gb/s drive work with my older 6Gb/s SAS controller?

Yes, the drive is backward compatible with 6Gb/s SAS controllers, though it will run at the lower 6Gb/s transfer rate instead of its maximum 12Gb/s speed.

How can I verify the 10000 RPM drive is performing correctly after installation?

Check the drive's reported RPM and SAS link speed in your RAID controller BIOS or OS disk utility; they should show 10000 RPM and a negotiated 12Gb/s or 6Gb/s link depending on your controller.

Does the bare drive include a mounting tray or caddy for my Dell server?

No, the drive ships as a bare 2.5" unit without a tray; you must supply a compatible Dell 2.5" drive caddy or tray separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.