DELL
DELL PowerEdge M640 Blade 2x Xeon Gold 6128 128GB DDR4 2x 4TB SATA
Blade server with dual 3.4 GHz Xeon Gold 6128 CPUs, 128 GB DDR4 ECC memory and two 4 TB SATA drives
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed3.4 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon Gold 6128 CPUs at 3.4 GHz deliver high compute density
- 128GB DDR4 ECC registered memory supports large virtualisation workloads
- Two 4TB SATA 2.5" drives provide 8TB raw capacity
- PERC H330 RAID controller with 1GB cache protects data
- iDRAC9 Enterprise remote management enables out-of-band control
Dell PowerEdge M640 blade server
The Dell PowerEdge M640 is a dual-socket blade server designed for dense compute environments. It ships with two Intel Xeon Gold 6128 processors and 128 GB of DDR4 memory. This configuration targets virtualization hosts and database workloads that need high core counts in a shared chassis.
Thermals noise and power draw
The blade form factor relies on the chassis fans for cooling, so acoustics and thermal output depend on the enclosure rather than the server itself. Power draw scales with the two 3.4 GHz Xeon Gold 6128 CPUs and the installed DDR4 modules under load. The integrated PERC H330 SAS storage controller manages the two 2.5 inch SATA drives without adding a separate RAID card.
Build integration and expandability
The unit fits a standard M-series blade chassis and connects through a 10 GbE 2-port 562T adapter for network fabric. Remote management is handled by iDRAC9 Enterprise for out-of-band control. Two drive bays support 2.5 inch SATA media, and memory can expand to 1 TB across the available DDR4 slots. Buyers who need more than two internal drives or a different drive interface should look at rackmount alternatives.
Highlights
- Dual Xeon Gold 6128 CPUs at 3.4 GHz deliver high compute density
- 128GB DDR4 ECC registered memory supports large virtualisation workloads
- Two 4TB SATA 2.5" drives provide 8TB raw capacity
- PERC H330 RAID controller with 1GB cache protects data
- iDRAC9 Enterprise remote management enables out-of-band control
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3.4 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 1TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | Dell PERC H330 SAS Storage Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 Enterprise |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions about this item
How do I install this M640 blade into a PowerEdge chassis, and what step is often missed?
Slide the blade firmly into an empty bay until the latch clicks, then verify iDRAC9 Enterprise shows the blade online before powering on; skipping the latch check leaves the blade partially seated.
What maintenance or replacement will the 2x 4TB SATA drives need later?
The SATA 2.5" drives are mechanical; plan to replace them after 3–5 years of continuous use or when SMART alerts appear, and keep firmware current via iDRAC9.
What limit appears first on the PERC H330 controller during sustained write workloads?
The H330 lacks a dedicated cache, so sustained writes saturate the controller’s write throughput before the dual Xeon Gold 6128 CPUs reach full utilisation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



