We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server with eight 3.5-inch drive bays front panel

DELL

DELL PowerEdge R730 8LFF Xeon E5-2660v4 256GB DDR4

SKU CH-G4G9-M5GFE

Rack server with eight 3.5-inch bays, one 14-core Xeon E5-2660v4 and 256GB DDR4 ECC memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed4 2 GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • Supports up to 8 drive bays for 3.5" storage expansion
  • Single Xeon E5-2660v4 with 14 cores and 35MB cache installed
  • 256GB DDR4 ECC registered memory provides high-capacity reliability
  • PERC H730 SAS controller enables hardware RAID performance
  • iDRAC8 Enterprise license delivers comprehensive remote management

Dell PowerEdge R730 8-Bay Server

This Dell PowerEdge R730 is a 2U rack-mount server system built for data-centre workloads. It arrives with a single Intel Xeon processor and 256 GB of DDR4 ECC registered memory installed. The chassis supports up to eight 3.5-inch drive bays and includes a PERC H730 SAS controller for RAID management. Remote administration is handled by iDRAC8 with an Enterprise licence.

Suits virtualisation hosts needing dense memory

The system fits environments that run multiple virtual machines or containers and benefit from the installed 256 GB DDR4 capacity with room to grow to 768 GB. Buyers who require a second processor, pre-installed drives, or GPU acceleration should look at other configurations because this unit ships with one CPU, no drives, and integrated graphics only.

Eight 3.5-inch drive bays with PERC H730 RAID

The defining specification is the 8-bay 3.5-inch chassis paired with the PERC H730 SAS controller, which determines how many drives you can install and what RAID levels are available. If your deployment needs more bays, 2.5-inch form factors, or a different controller, this server will not match the requirement.

Highlights

  • Supports up to 8 drive bays for 3.5" storage expansion
  • Single Xeon E5-2660v4 with 14 cores and 35MB cache installed
  • 256GB DDR4 ECC registered memory provides high-capacity reliability
  • PERC H730 SAS controller enables hardware RAID performance
  • iDRAC8 Enterprise license delivers comprehensive remote management

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed4 2 GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)6,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

Will the 36 x 24 x 10 inch chassis fit in a standard 42U rack with 600 mm depth?

The unit measures 36 inches deep by 24 inches wide by 10 inches high and weighs 40 lb; verify your rack depth and weight rating before mounting.

How do I install the PERC H730 RAID controller and the step people miss?

Seat the PERC H730 in the dedicated internal slot, connect the SAS cables to the backplane, then enable the controller in BIOS before creating any virtual disks.

When should I replace the 495 W power supplies in this R730?

Run both 495 W supplies in redundant mode; replace a unit immediately if iDRAC8 reports a fault LED or the system logs a power-supply critical event.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.